dsx3SendCode
This variable indicates what type of code is being sent across the DS3/E3 interface by the device. (These are optional for E3 interfaces.) Setting this variable causes the interface to begin sending the code requested. The values mean: dsx3SendNoCode sending looped or normal data dsx3SendLineCode sending a request for a line loopback dsx3SendPayloadCode sending a request for a payload loopback (i.e., all DS1/E1s in a DS3/E3 frame) dsx3SendResetCode sending a loopback deactivation request dsx3SendDS1LoopCode requesting to loopback a particular DS1/E1 within a DS3/E3 frame. The DS1/E1 is indicated in dsx3Ds1ForRemoteLoop. dsx3SendTestPattern sending a test pattern.
Details
| 1 | dsx3SendNoCode |
| 2 | dsx3SendLineCode |
| 3 | dsx3SendPayloadCode |
| 4 | dsx3SendResetCode |
| 5 | dsx3SendDS1LoopCode |
| 6 | dsx3SendTestPattern |
Table columns
18 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.2.1.10.30.5.1.1 | dsx3LineIndex | readonly | InterfaceIndex |
| 1.3.6.1.2.1.10.30.5.1.2 | dsx3IfIndex | readonly | InterfaceIndex |
| 1.3.6.1.2.1.10.30.5.1.3 | dsx3TimeElapsed | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.4 | dsx3ValidIntervals | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.5 | dsx3LineType | readwrite | dsx3other(1), dsx3M23(2), dsx3SYNTRAN(3), dsx3CbitParity(4), dsx3ClearChannel(5), e3other(6), e3Framed(7), e3Plcp(8), dsx3M13(9) |
| 1.3.6.1.2.1.10.30.5.1.6 | dsx3LineCoding | readwrite | dsx3Other(1), dsx3B3ZS(2), e3HDB3(3) |
| 1.3.6.1.2.1.10.30.5.1.7 | dsx3SendCode | readwrite | dsx3SendNoCode(1), dsx3SendLineCode(2), dsx3SendPayloadCode(3), dsx3SendResetCode(4), dsx3SendDS1LoopCode(5), dsx3SendTestPattern(6) |
| 1.3.6.1.2.1.10.30.5.1.8 | dsx3CircuitIdentifier | readwrite | Unknown |
| 1.3.6.1.2.1.10.30.5.1.9 | dsx3LoopbackConfig | readwrite | dsx3NoLoop(1), dsx3PayloadLoop(2), dsx3LineLoop(3), dsx3OtherLoop(4), dsx3InwardLoop(5), dsx3DualLoop(6) |
| 1.3.6.1.2.1.10.30.5.1.10 | dsx3LineStatus | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.11 | dsx3TransmitClockSource | readwrite | loopTiming(1), localTiming(2), throughTiming(3) |
| 1.3.6.1.2.1.10.30.5.1.12 | dsx3InvalidIntervals | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.13 | dsx3LineLength | readwrite | Unknown |
| 1.3.6.1.2.1.10.30.5.1.14 | dsx3LineStatusLastChange | readonly | TimeStamp |
| 1.3.6.1.2.1.10.30.5.1.15 | dsx3LineStatusChangeTrapEnable | readwrite | enabled(1), disabled(2) |
| 1.3.6.1.2.1.10.30.5.1.16 | dsx3LoopbackStatus | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.17 | dsx3Channelization | readwrite | disabled(1), enabledDs1(2), enabledDs2(3) |
| 1.3.6.1.2.1.10.30.5.1.18 | dsx3Ds1ForRemoteLoop | readwrite | Unknown |
Used by conformance groups
1 objects- 1.3.6.1.2.1.10.30.14.1.1 ds3NearEndConfigGroup