dsx3LineIndex
This object should be made equal to ifIndex. The next paragraph describes its previous usage. Making the object equal to ifIndex allows proper use of ifStackTable. Previously, this object was the identifier of a DS3/E3 Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS3/E3 interface, it should have the same value as ifIndex. Otherwise, number the dsx3LineIndices with an unique identifier following the rules of choosing a number that is greater than ifNumber and numbering the inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g., network side) with odd numbers.
Table columns
18 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.2.1.10.30.5.1.1 | dsx3LineIndex | readonly | InterfaceIndex |
| 1.3.6.1.2.1.10.30.5.1.2 | dsx3IfIndex | readonly | InterfaceIndex |
| 1.3.6.1.2.1.10.30.5.1.3 | dsx3TimeElapsed | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.4 | dsx3ValidIntervals | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.5 | dsx3LineType | readwrite | dsx3other(1), dsx3M23(2), dsx3SYNTRAN(3), dsx3CbitParity(4), dsx3ClearChannel(5), e3other(6), e3Framed(7), e3Plcp(8), dsx3M13(9) |
| 1.3.6.1.2.1.10.30.5.1.6 | dsx3LineCoding | readwrite | dsx3Other(1), dsx3B3ZS(2), e3HDB3(3) |
| 1.3.6.1.2.1.10.30.5.1.7 | dsx3SendCode | readwrite | dsx3SendNoCode(1), dsx3SendLineCode(2), dsx3SendPayloadCode(3), dsx3SendResetCode(4), dsx3SendDS1LoopCode(5), dsx3SendTestPattern(6) |
| 1.3.6.1.2.1.10.30.5.1.8 | dsx3CircuitIdentifier | readwrite | Unknown |
| 1.3.6.1.2.1.10.30.5.1.9 | dsx3LoopbackConfig | readwrite | dsx3NoLoop(1), dsx3PayloadLoop(2), dsx3LineLoop(3), dsx3OtherLoop(4), dsx3InwardLoop(5), dsx3DualLoop(6) |
| 1.3.6.1.2.1.10.30.5.1.10 | dsx3LineStatus | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.11 | dsx3TransmitClockSource | readwrite | loopTiming(1), localTiming(2), throughTiming(3) |
| 1.3.6.1.2.1.10.30.5.1.12 | dsx3InvalidIntervals | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.13 | dsx3LineLength | readwrite | Unknown |
| 1.3.6.1.2.1.10.30.5.1.14 | dsx3LineStatusLastChange | readonly | TimeStamp |
| 1.3.6.1.2.1.10.30.5.1.15 | dsx3LineStatusChangeTrapEnable | readwrite | enabled(1), disabled(2) |
| 1.3.6.1.2.1.10.30.5.1.16 | dsx3LoopbackStatus | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.17 | dsx3Channelization | readwrite | disabled(1), enabledDs1(2), enabledDs2(3) |
| 1.3.6.1.2.1.10.30.5.1.18 | dsx3Ds1ForRemoteLoop | readwrite | Unknown |
Used by conformance groups
1 objects- 1.3.6.1.2.1.10.30.14.1.1 ds3NearEndConfigGroup