dsx3LineStatus
This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The dsx3LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures and a loopback (see dsx3LoopbackConfig object for the type of loopback) simultaneously. The dsx3NoAlarm must be set if and only if no other flag is set. If the dsx3loopbackState bit is set, the loopback in effect can be determined from the dsx3loopbackConfig object. The various bit positions are: 1 dsx3NoAlarm No alarm present 2 dsx3RcvRAIFailure Receiving Yellow/Remote Alarm Indication 4 dsx3XmitRAIAlarm Transmitting Yellow/Remote Alarm Indication 8 dsx3RcvAIS Receiving AIS failure state 16 dsx3XmitAIS Transmitting AIS 32 dsx3LOF Receiving LOF failure state 64 dsx3LOS Receiving LOS failure state 128 dsx3LoopbackState Looping the received signal 256 dsx3RcvTestCode Receiving a Test Pattern 512 dsx3OtherFailure any line status not defined here 1024 dsx3UnavailSigState Near End in Unavailable Signal State 2048 dsx3NetEquipOOS Carrier Equipment Out of Service
Table columns
18 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.2.1.10.30.5.1.1 | dsx3LineIndex | readonly | InterfaceIndex |
| 1.3.6.1.2.1.10.30.5.1.2 | dsx3IfIndex | readonly | InterfaceIndex |
| 1.3.6.1.2.1.10.30.5.1.3 | dsx3TimeElapsed | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.4 | dsx3ValidIntervals | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.5 | dsx3LineType | readwrite | dsx3other(1), dsx3M23(2), dsx3SYNTRAN(3), dsx3CbitParity(4), dsx3ClearChannel(5), e3other(6), e3Framed(7), e3Plcp(8), dsx3M13(9) |
| 1.3.6.1.2.1.10.30.5.1.6 | dsx3LineCoding | readwrite | dsx3Other(1), dsx3B3ZS(2), e3HDB3(3) |
| 1.3.6.1.2.1.10.30.5.1.7 | dsx3SendCode | readwrite | dsx3SendNoCode(1), dsx3SendLineCode(2), dsx3SendPayloadCode(3), dsx3SendResetCode(4), dsx3SendDS1LoopCode(5), dsx3SendTestPattern(6) |
| 1.3.6.1.2.1.10.30.5.1.8 | dsx3CircuitIdentifier | readwrite | Unknown |
| 1.3.6.1.2.1.10.30.5.1.9 | dsx3LoopbackConfig | readwrite | dsx3NoLoop(1), dsx3PayloadLoop(2), dsx3LineLoop(3), dsx3OtherLoop(4), dsx3InwardLoop(5), dsx3DualLoop(6) |
| 1.3.6.1.2.1.10.30.5.1.10 | dsx3LineStatus | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.11 | dsx3TransmitClockSource | readwrite | loopTiming(1), localTiming(2), throughTiming(3) |
| 1.3.6.1.2.1.10.30.5.1.12 | dsx3InvalidIntervals | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.13 | dsx3LineLength | readwrite | Unknown |
| 1.3.6.1.2.1.10.30.5.1.14 | dsx3LineStatusLastChange | readonly | TimeStamp |
| 1.3.6.1.2.1.10.30.5.1.15 | dsx3LineStatusChangeTrapEnable | readwrite | enabled(1), disabled(2) |
| 1.3.6.1.2.1.10.30.5.1.16 | dsx3LoopbackStatus | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.17 | dsx3Channelization | readwrite | disabled(1), enabledDs1(2), enabledDs2(3) |
| 1.3.6.1.2.1.10.30.5.1.18 | dsx3Ds1ForRemoteLoop | readwrite | Unknown |
Used by notifications
1 objects- 1.3.6.1.2.1.10.30.15.0.1 dsx3LineStatusChange
Used by conformance groups
1 objects- 1.3.6.1.2.1.10.30.14.1.1 ds3NearEndConfigGroup