dsx3LineType
This variable indicates the variety of DS3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of DS3 is 44.736 Mbps and E3 is 34.368 Mbps. The dsx3ClearChannel value means that the C-bits are not used except for sending/receiving AIS. The values, in sequence, describe: TITLE: SPECIFICATION: dsx3M23 ANSI T1.107-1988 dsx3SYNTRAN ANSI T1.107-1988 dsx3CbitParity ANSI T1.107a-1990 dsx3ClearChannel ANSI T1.102-1987 e3Framed CCITT G.751 e3Plcp ETSI T/NA(91)18 dsx3M13 ANSI T1.107a-1990.
Details
| 1 | dsx3other |
| 2 | dsx3M23 |
| 3 | dsx3SYNTRAN |
| 4 | dsx3CbitParity |
| 5 | dsx3ClearChannel |
| 6 | e3other |
| 7 | e3Framed |
| 8 | e3Plcp |
| 9 | dsx3M13 |
American National Standard for telecommunications - digital hierarchy - formats specification, ANSI T1.107- 1988. ANSI T1.107a-1990. American National Standard for telecommunications - digital hierarchy - electrical interfaces, ANSI T1.102- 1987. CCITT - Digital Multiplex Equipment Operating at the Third Order Bit Rate of 34 368 Kbit/s and the Forth Order Bit Rate of 139 264 Kbit/s and Using Positive Justification, G.751 European Telecommunications Standards Institute -- ETS '34M' -- Metropolitan Area Network Physical Convergence Layer Procedure for 34.368 Megabits per Second, T/NA(91)18, May 1991.
Table columns
18 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.2.1.10.30.5.1.1 | dsx3LineIndex | readonly | InterfaceIndex |
| 1.3.6.1.2.1.10.30.5.1.2 | dsx3IfIndex | readonly | InterfaceIndex |
| 1.3.6.1.2.1.10.30.5.1.3 | dsx3TimeElapsed | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.4 | dsx3ValidIntervals | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.5 | dsx3LineType | readwrite | dsx3other(1), dsx3M23(2), dsx3SYNTRAN(3), dsx3CbitParity(4), dsx3ClearChannel(5), e3other(6), e3Framed(7), e3Plcp(8), dsx3M13(9) |
| 1.3.6.1.2.1.10.30.5.1.6 | dsx3LineCoding | readwrite | dsx3Other(1), dsx3B3ZS(2), e3HDB3(3) |
| 1.3.6.1.2.1.10.30.5.1.7 | dsx3SendCode | readwrite | dsx3SendNoCode(1), dsx3SendLineCode(2), dsx3SendPayloadCode(3), dsx3SendResetCode(4), dsx3SendDS1LoopCode(5), dsx3SendTestPattern(6) |
| 1.3.6.1.2.1.10.30.5.1.8 | dsx3CircuitIdentifier | readwrite | Unknown |
| 1.3.6.1.2.1.10.30.5.1.9 | dsx3LoopbackConfig | readwrite | dsx3NoLoop(1), dsx3PayloadLoop(2), dsx3LineLoop(3), dsx3OtherLoop(4), dsx3InwardLoop(5), dsx3DualLoop(6) |
| 1.3.6.1.2.1.10.30.5.1.10 | dsx3LineStatus | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.11 | dsx3TransmitClockSource | readwrite | loopTiming(1), localTiming(2), throughTiming(3) |
| 1.3.6.1.2.1.10.30.5.1.12 | dsx3InvalidIntervals | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.13 | dsx3LineLength | readwrite | Unknown |
| 1.3.6.1.2.1.10.30.5.1.14 | dsx3LineStatusLastChange | readonly | TimeStamp |
| 1.3.6.1.2.1.10.30.5.1.15 | dsx3LineStatusChangeTrapEnable | readwrite | enabled(1), disabled(2) |
| 1.3.6.1.2.1.10.30.5.1.16 | dsx3LoopbackStatus | readonly | Unknown |
| 1.3.6.1.2.1.10.30.5.1.17 | dsx3Channelization | readwrite | disabled(1), enabledDs1(2), enabledDs2(3) |
| 1.3.6.1.2.1.10.30.5.1.18 | dsx3Ds1ForRemoteLoop | readwrite | Unknown |
Used by conformance groups
1 objects- 1.3.6.1.2.1.10.30.14.1.1 ds3NearEndConfigGroup