xupsRecepShedSecsWithRestart
Setting this value will cause the UPS output to turn off after the set number of seconds, then restart (after a UPS-defined 'down time') when the utility is again available. Unlike xupsRecepOffDelaySecs, which might or might not, this object always maps to the XCP 0x8A Load Dump & Restart command, so the desired shutdown and restart behavior is guaranteed to happen. Once set, this command cannot be aborted.
Table columns
10 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.4.1.534.1.12.2.1.1 | xupsRecepIndex | readonly | Unknown |
| 1.3.6.1.4.1.534.1.12.2.1.2 | xupsRecepStatus | readonly | on(1), off(2), pendingOff(3), pendingOn(4), unknown(5), reserved(6), failedClosed(7), failedOpen(8) |
| 1.3.6.1.4.1.534.1.12.2.1.3 | xupsRecepOffDelaySecs | readwrite | Unknown |
| 1.3.6.1.4.1.534.1.12.2.1.4 | xupsRecepOnDelaySecs | readwrite | Unknown |
| 1.3.6.1.4.1.534.1.12.2.1.5 | xupsRecepAutoOffDelay | readwrite | Unknown |
| 1.3.6.1.4.1.534.1.12.2.1.6 | xupsRecepAutoOnDelay | readwrite | Unknown |
| 1.3.6.1.4.1.534.1.12.2.1.7 | xupsRecepShedSecsWithRestart | readwrite | Unknown |
| 1.3.6.1.4.1.534.1.12.2.1.8 | xupsRecepHourlyPowerUsage | readonly | Unknown |
| 1.3.6.1.4.1.534.1.12.2.1.9 | xupsRecepCumulativePowerUsage | readwrite | Unknown |
| 1.3.6.1.4.1.534.1.12.2.1.10 | xupsRecepCumulativePowerUsageTimer | readonly | Counter32 |
Used by conformance groups
1 objects- 1.3.6.1.4.1.534.1.100.16 xupsRecepFullGroup