xupsRecepOffDelaySecs
The Delay until the Receptacle is turned Off. Setting this value to other than -1 will cause the UPS output to turn off after the number of seconds (0 is immediately). Setting it to -1 will cause an attempt to abort a pending shutdown. When this object is set while the UPS is On Battery, it is not necessary to set xupsRecepOnDelaySecs, since the outlet will turn back on automatically when power is available again.
Table columns
10 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.4.1.534.1.12.2.1.1 | xupsRecepIndex | readonly | Unknown |
| 1.3.6.1.4.1.534.1.12.2.1.2 | xupsRecepStatus | readonly | on(1), off(2), pendingOff(3), pendingOn(4), unknown(5), reserved(6), failedClosed(7), failedOpen(8) |
| 1.3.6.1.4.1.534.1.12.2.1.3 | xupsRecepOffDelaySecs | readwrite | Unknown |
| 1.3.6.1.4.1.534.1.12.2.1.4 | xupsRecepOnDelaySecs | readwrite | Unknown |
| 1.3.6.1.4.1.534.1.12.2.1.5 | xupsRecepAutoOffDelay | readwrite | Unknown |
| 1.3.6.1.4.1.534.1.12.2.1.6 | xupsRecepAutoOnDelay | readwrite | Unknown |
| 1.3.6.1.4.1.534.1.12.2.1.7 | xupsRecepShedSecsWithRestart | readwrite | Unknown |
| 1.3.6.1.4.1.534.1.12.2.1.8 | xupsRecepHourlyPowerUsage | readonly | Unknown |
| 1.3.6.1.4.1.534.1.12.2.1.9 | xupsRecepCumulativePowerUsage | readwrite | Unknown |
| 1.3.6.1.4.1.534.1.12.2.1.10 | xupsRecepCumulativePowerUsageTimer | readonly | Counter32 |
Used by conformance groups
1 objects- 1.3.6.1.4.1.534.1.100.16 xupsRecepFullGroup