acDs1ConfigLoopbackConfig

  • 1.3.6.1.4.1.2785.2.3.4.1.1.17
  • Access readwrite
  • Type none(1), payload(2), facility(3), other(4), terminal(5), dual(6)
  • Default none

This variable represents the desired loopback configuration of the DS1 interface. Agents supporting read/write access should return inconsistentValue in response to a requested loopback state that the interface does not support. The values mean: none Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. payload The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. facility The received signal at this interface does not go through the device (minimum penetration) but is looped back out. other Loopbacks that are not defined here. terminal The transmitted signal at this interface is looped back and received by the same interface. What is transmitted onto the line is product dependent. dual Both acDs1LineLoop and acDs1InwardLoop will be active simultaneously. **NOADMINDOWN**

Details

Possible values
1 none
2 payload
3 facility
4 other
5 terminal
6 dual

Table columns

30 objects
Oid Name Access Type
1.3.6.1.4.1.2785.2.3.4.1.1.1 acDs1ConfigNodeId notifyonly AcNodeId
1.3.6.1.4.1.2785.2.3.4.1.1.2 acDs1ConfigSlot notifyonly AcSlotNumber
1.3.6.1.4.1.2785.2.3.4.1.1.3 acDs1ConfigPort notifyonly AcPortNumber
1.3.6.1.4.1.2785.2.3.4.1.1.4 acDs1ConfigAdminStatus readwrite AcAdminStatus
1.3.6.1.4.1.2785.2.3.4.1.1.5 acDs1ConfigOpStatus readonly AcOpStatus
1.3.6.1.4.1.2785.2.3.4.1.1.6 acDs1ConfigTimeElapsedInterval readonly Unknown
1.3.6.1.4.1.2785.2.3.4.1.1.7 acDs1ConfigValidIntervals readonly Unknown
1.3.6.1.4.1.2785.2.3.4.1.1.8 acDs1ConfigTimeElapsedDay readonly Unknown
1.3.6.1.4.1.2785.2.3.4.1.1.9 acDs1ConfigValidDays readonly Unknown
1.3.6.1.4.1.2785.2.3.4.1.1.10 acDs1ConfigTimeElapsedFarEndInterval readonly Unknown
1.3.6.1.4.1.2785.2.3.4.1.1.11 acDs1ConfigValidFarEndIntervals readonly Unknown
1.3.6.1.4.1.2785.2.3.4.1.1.12 acDs1ConfigTimeElapsedFarEndDay readonly Unknown
1.3.6.1.4.1.2785.2.3.4.1.1.13 acDs1ConfigValidFarEndDays readonly Unknown
1.3.6.1.4.1.2785.2.3.4.1.1.14 acDs1ConfigLineType readwrite esf(1), d4(2)
1.3.6.1.4.1.2785.2.3.4.1.1.15 acDs1ConfigLineCoding readwrite b8zs(1), ami(2)
1.3.6.1.4.1.2785.2.3.4.1.1.16 acDs1ConfigCircuitIdentifier readwrite Unknown
1.3.6.1.4.1.2785.2.3.4.1.1.17 acDs1ConfigLoopbackConfig readwrite none(1), payload(2), facility(3), other(4), terminal(5), dual(6)
1.3.6.1.4.1.2785.2.3.4.1.1.18 acDs1ConfigLineStatus readonly Unknown
1.3.6.1.4.1.2785.2.3.4.1.1.19 acDs1ConfigSignalMode readonly none(1), message(2), other(3)
1.3.6.1.4.1.2785.2.3.4.1.1.20 acDs1ConfigTransmitClockSource readonly bits(1), local(2), through(3)
1.3.6.1.4.1.2785.2.3.4.1.1.21 acDs1ConfigFdl readonly Unknown
1.3.6.1.4.1.2785.2.3.4.1.1.22 acDs1ConfigInvalidIntervals readonly Unknown
1.3.6.1.4.1.2785.2.3.4.1.1.23 acDs1ConfigInvalidDays readonly Unknown
1.3.6.1.4.1.2785.2.3.4.1.1.24 acDs1ConfigInvalidFarEndIntervals readonly Unknown
1.3.6.1.4.1.2785.2.3.4.1.1.25 acDs1ConfigInvalidFarEndDays readonly Unknown
1.3.6.1.4.1.2785.2.3.4.1.1.26 acDs1ConfigLineStatusLastChange readonly TimeStamp
1.3.6.1.4.1.2785.2.3.4.1.1.27 acDs1ConfigLineStatusChangeTrapEnable readwrite enabled(1), disabled(2)
1.3.6.1.4.1.2785.2.3.4.1.1.28 acDs1ConfigLoopbackStatus readonly Unknown
1.3.6.1.4.1.2785.2.3.4.1.1.29 acDs1ConfigInterfaceName readwrite Unknown
1.3.6.1.4.1.2785.2.3.4.1.1.30 acDs1ConfigTimeSlotIndex readwrite Integer32

Comments