crepIfStcnPropagateToIf
This object specifies the interface to which the REP edge should propagate the segment topology change notifications. The interface should be of type ifType = 'ethernetCsmacd' or an ethernet based virtual port with ifType = 'propVirtual'. '0' specifies that the device should not propagate STCNs to any interface. This value is only effective on the device acting as the REP primary edge.
This OID is also declared by other modules:
CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB
Table columns
40 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.4.1.9.9.601.1.2.1.1.1 | crepIfIndex | noaccess | InterfaceIndex |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.2 | crepIfSegmentId | readwrite | RepSegmentId |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.3 | crepIfOperStatus | readonly | none(1), initDown(2), noNeighbour(3), oneWay(4), twoWay(5), flapping(6), wait(7), unknown(8) |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.4 | crepIfPortRole | readonly | failedPort(1), alternatePort(2), openPort(3), failedPortNoNeighbor(4), failedPortLogicalOpen(5) |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.5 | crepIfPortID | readonly | Unknown |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.6 | crepIfAdminEdgePortType | readwrite | RepPortType |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.7 | crepIfOperEdgePortType | readonly | RepPortType |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.8 | crepIfPreferredConfig | readwrite | TruthValue |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.9 | crepifBlockedVlans1k | readwrite | CiscoVlanList |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.10 | crepifBlockedVlans2k | readwrite | CiscoVlanList |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.11 | crepifBlockedVlans3k | readwrite | CiscoVlanList |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.12 | crepifBlockedVlans4k | readwrite | CiscoVlanList |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.13 | crepLoadBalanceBlockPortType | readwrite | none(1), offset(2), portId(3), prefFlag(4) |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.14 | crepBlockPortNumInfo | readwrite | Unknown |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.15 | crepBlockPortIdInfo | readwrite | Unknown |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.16 | crepIfPreemptDelayTimer | readwrite | Unknown |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.17 | crepIfStcnPropagateToSTP | readwrite | TruthValue |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.18 | crepIfStcnPropagateToOtherSegs | readwrite | RepSegmentList |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.19 | crepIfStcnPropagateToIf | readwrite | InterfaceIndexOrZero |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.20 | crepIfConfigRowStatus | readwrite | RowStatus |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.1 | crepIfIndex | noaccess | InterfaceIndex |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.2 | crepIfSegmentId | readwrite | RepSegmentId |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.3 | crepIfOperStatus | readonly | none(1), initDown(2), noNeighbour(3), oneWay(4), twoWay(5), flapping(6), wait(7), unknown(8) |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.4 | crepIfPortRole | readonly | failedPort(1), alternatePort(2), openPort(3), failedPortNoNeighbor(4), failedPortLogicalOpen(5) |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.5 | crepIfPortID | readonly | Unknown |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.6 | crepIfAdminEdgePortType | readwrite | RepPortType |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.7 | crepIfOperEdgePortType | readonly | RepPortType |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.8 | crepIfPreferredConfig | readwrite | TruthValue |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.9 | crepifBlockedVlans1k | readwrite | CiscoVlanList |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.10 | crepifBlockedVlans2k | readwrite | CiscoVlanList |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.11 | crepifBlockedVlans3k | readwrite | CiscoVlanList |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.12 | crepifBlockedVlans4k | readwrite | CiscoVlanList |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.13 | crepLoadBalanceBlockPortType | readwrite | none(1), offset(2), portId(3), prefFlag(4) |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.14 | crepBlockPortNumInfo | readwrite | Unknown |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.15 | crepBlockPortIdInfo | readwrite | Unknown |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.16 | crepIfPreemptDelayTimer | readwrite | Unknown |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.17 | crepIfStcnPropagateToSTP | readwrite | TruthValue |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.18 | crepIfStcnPropagateToOtherSegs | readwrite | RepSegmentList |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.19 | crepIfStcnPropagateToIf | readwrite | InterfaceIndexOrZero |
| 1.3.6.1.4.1.9.9.601.1.2.1.1.20 | crepIfConfigRowStatus | readwrite | RowStatus |
Used by conformance groups
1 objects- 1.3.6.1.4.1.9.9.601.2.2.2 ciscoRepInterfaceGroup