crepIfPreemptDelayTimer

  • 1.3.6.1.4.1.9.9.601.1.2.1.1.16
  • Access readwrite
  • Type Unknown
  • Unit delay in seconds
  • Default -1

This object specifies the interval of time that REP waits before triggering preemption after the segment is complete. The value -1 is used to indicate that no time delay is configured and the preemption will happen manually. This value is only effective on the device acting as the REP primary edge.

This OID is also declared by other modules: CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB

Table columns

40 objects
Oid Name Access Type
1.3.6.1.4.1.9.9.601.1.2.1.1.1 crepIfIndex noaccess InterfaceIndex
1.3.6.1.4.1.9.9.601.1.2.1.1.2 crepIfSegmentId readwrite RepSegmentId
1.3.6.1.4.1.9.9.601.1.2.1.1.3 crepIfOperStatus readonly none(1), initDown(2), noNeighbour(3), oneWay(4), twoWay(5), flapping(6), wait(7), unknown(8)
1.3.6.1.4.1.9.9.601.1.2.1.1.4 crepIfPortRole readonly failedPort(1), alternatePort(2), openPort(3), failedPortNoNeighbor(4), failedPortLogicalOpen(5)
1.3.6.1.4.1.9.9.601.1.2.1.1.5 crepIfPortID readonly Unknown
1.3.6.1.4.1.9.9.601.1.2.1.1.6 crepIfAdminEdgePortType readwrite RepPortType
1.3.6.1.4.1.9.9.601.1.2.1.1.7 crepIfOperEdgePortType readonly RepPortType
1.3.6.1.4.1.9.9.601.1.2.1.1.8 crepIfPreferredConfig readwrite TruthValue
1.3.6.1.4.1.9.9.601.1.2.1.1.9 crepifBlockedVlans1k readwrite CiscoVlanList
1.3.6.1.4.1.9.9.601.1.2.1.1.10 crepifBlockedVlans2k readwrite CiscoVlanList
1.3.6.1.4.1.9.9.601.1.2.1.1.11 crepifBlockedVlans3k readwrite CiscoVlanList
1.3.6.1.4.1.9.9.601.1.2.1.1.12 crepifBlockedVlans4k readwrite CiscoVlanList
1.3.6.1.4.1.9.9.601.1.2.1.1.13 crepLoadBalanceBlockPortType readwrite none(1), offset(2), portId(3), prefFlag(4)
1.3.6.1.4.1.9.9.601.1.2.1.1.14 crepBlockPortNumInfo readwrite Unknown
1.3.6.1.4.1.9.9.601.1.2.1.1.15 crepBlockPortIdInfo readwrite Unknown
1.3.6.1.4.1.9.9.601.1.2.1.1.16 crepIfPreemptDelayTimer readwrite Unknown
1.3.6.1.4.1.9.9.601.1.2.1.1.17 crepIfStcnPropagateToSTP readwrite TruthValue
1.3.6.1.4.1.9.9.601.1.2.1.1.18 crepIfStcnPropagateToOtherSegs readwrite RepSegmentList
1.3.6.1.4.1.9.9.601.1.2.1.1.19 crepIfStcnPropagateToIf readwrite InterfaceIndexOrZero
1.3.6.1.4.1.9.9.601.1.2.1.1.20 crepIfConfigRowStatus readwrite RowStatus
1.3.6.1.4.1.9.9.601.1.2.1.1.1 crepIfIndex noaccess InterfaceIndex
1.3.6.1.4.1.9.9.601.1.2.1.1.2 crepIfSegmentId readwrite RepSegmentId
1.3.6.1.4.1.9.9.601.1.2.1.1.3 crepIfOperStatus readonly none(1), initDown(2), noNeighbour(3), oneWay(4), twoWay(5), flapping(6), wait(7), unknown(8)
1.3.6.1.4.1.9.9.601.1.2.1.1.4 crepIfPortRole readonly failedPort(1), alternatePort(2), openPort(3), failedPortNoNeighbor(4), failedPortLogicalOpen(5)
1.3.6.1.4.1.9.9.601.1.2.1.1.5 crepIfPortID readonly Unknown
1.3.6.1.4.1.9.9.601.1.2.1.1.6 crepIfAdminEdgePortType readwrite RepPortType
1.3.6.1.4.1.9.9.601.1.2.1.1.7 crepIfOperEdgePortType readonly RepPortType
1.3.6.1.4.1.9.9.601.1.2.1.1.8 crepIfPreferredConfig readwrite TruthValue
1.3.6.1.4.1.9.9.601.1.2.1.1.9 crepifBlockedVlans1k readwrite CiscoVlanList
1.3.6.1.4.1.9.9.601.1.2.1.1.10 crepifBlockedVlans2k readwrite CiscoVlanList
1.3.6.1.4.1.9.9.601.1.2.1.1.11 crepifBlockedVlans3k readwrite CiscoVlanList
1.3.6.1.4.1.9.9.601.1.2.1.1.12 crepifBlockedVlans4k readwrite CiscoVlanList
1.3.6.1.4.1.9.9.601.1.2.1.1.13 crepLoadBalanceBlockPortType readwrite none(1), offset(2), portId(3), prefFlag(4)
1.3.6.1.4.1.9.9.601.1.2.1.1.14 crepBlockPortNumInfo readwrite Unknown
1.3.6.1.4.1.9.9.601.1.2.1.1.15 crepBlockPortIdInfo readwrite Unknown
1.3.6.1.4.1.9.9.601.1.2.1.1.16 crepIfPreemptDelayTimer readwrite Unknown
1.3.6.1.4.1.9.9.601.1.2.1.1.17 crepIfStcnPropagateToSTP readwrite TruthValue
1.3.6.1.4.1.9.9.601.1.2.1.1.18 crepIfStcnPropagateToOtherSegs readwrite RepSegmentList
1.3.6.1.4.1.9.9.601.1.2.1.1.19 crepIfStcnPropagateToIf readwrite InterfaceIndexOrZero
1.3.6.1.4.1.9.9.601.1.2.1.1.20 crepIfConfigRowStatus readwrite RowStatus

Used by conformance groups

1 objects
  • 1.3.6.1.4.1.9.9.601.2.2.2 ciscoRepInterfaceGroup

Comments