csApsArchMode

  • 1.3.6.1.4.1.9.9.126.1.2.1.1.4
  • Access readwrite
  • Type onePlusOne(1), oneToOne(2), anexBOnePlusOne(3), ycableOnePlusOneNok1k2(4), straightOnePlusOneNok1k2(5)

This object is used to configure APS architecture mode on the working/protection line pairs. All of the following are supported on single slot. oneToOne(2) is not supported across 2 slots,i.e. the working and protection slot numbers must be the same in oneToOne(2). onePlusOne : This can be supported on the same card and across 2 cards. This mode means that the transmit and receive signals go only over the active line(which could be working or protection line). (straight cable implied) oneToOne : This is supported only on the same card This mode means that the transmit and receive signals go over the working and protection lines. (straight cable implied) anexBOnePlusOne : This can be supported on the same card and across 2 cards. This mode is like the onePlusOne mode, except that the 'csApsDirection' can only be bi-directional. (straight cable implied) ycableOnePlusOneNok1k2: With Y-cable ignore K1K2 bytes. This mode is the Y-cable redundancy mode. straightOnePlusOneNok1k2 : With straight cable, ignore K1K2 bytes. This mode is like onePlusOne, but with K1, K2 bytes ignored.

This OID is also declared by other modules: CISCO-SONET-MIB

Details

Possible values
1 onePlusOne
2 oneToOne
3 anexBOnePlusOne
4 ycableOnePlusOneNok1k2
5 straightOnePlusOneNok1k2

Table columns

32 objects
Oid Name Access Type
1.3.6.1.4.1.9.9.126.1.2.1.1.1 csApsWorkingIndex noaccess InterfaceIndex
1.3.6.1.4.1.9.9.126.1.2.1.1.2 csApsProtectionIndex readwrite InterfaceIndex
1.3.6.1.4.1.9.9.126.1.2.1.1.3 csApsEnable readwrite csApsDisabled(1), csApsEnabled(2)
1.3.6.1.4.1.9.9.126.1.2.1.1.4 csApsArchMode readwrite onePlusOne(1), oneToOne(2), anexBOnePlusOne(3), ycableOnePlusOneNok1k2(4), straightOnePlusOneNok1k2(5)
1.3.6.1.4.1.9.9.126.1.2.1.1.5 csApsActiveLine readonly csApsWorkingLine(1), csApsProtectionLine(2), csApsNone(3)
1.3.6.1.4.1.9.9.126.1.2.1.1.6 csApsSigFaultBER readwrite Unknown
1.3.6.1.4.1.9.9.126.1.2.1.1.7 csApsSigDegradeBER readwrite Unknown
1.3.6.1.4.1.9.9.126.1.2.1.1.8 csApsWaitToRestore readwrite Unknown
1.3.6.1.4.1.9.9.126.1.2.1.1.9 csApsDirection readwrite uniDirectional(1), biDirectional(2)
1.3.6.1.4.1.9.9.126.1.2.1.1.10 csApsRevertive readwrite nonrevertive(1), revertive(2)
1.3.6.1.4.1.9.9.126.1.2.1.1.11 csApsDirectionOperational readonly uniDirectional(1), biDirectional(2)
1.3.6.1.4.1.9.9.126.1.2.1.1.12 csApsArchModeOperational readonly onePlusOne(1), oneToOne(2), anexBOnePlusOne(3), ycableOnePlusOneNok1k2(4), straightOnePlusOneNok1k2(5)
1.3.6.1.4.1.9.9.126.1.2.1.1.13 csApsChannelProtocol readwrite bellcore(1), itu(2)
1.3.6.1.4.1.9.9.126.1.2.1.1.14 csApsFailureStatus readonly CsApsLineFailureStatus
1.3.6.1.4.1.9.9.126.1.2.1.1.15 csApsSwitchReason readonly CsApsLineSwitchReason
1.3.6.1.4.1.9.9.126.1.2.1.1.16 csApsPrimarySection readonly workingSection1(1), workingSection2(2), none(3)
1.3.6.1.4.1.9.9.126.1.2.1.1.1 csApsWorkingIndex noaccess InterfaceIndex
1.3.6.1.4.1.9.9.126.1.2.1.1.2 csApsProtectionIndex readwrite InterfaceIndex
1.3.6.1.4.1.9.9.126.1.2.1.1.3 csApsEnable readwrite csApsDisabled(1), csApsEnabled(2)
1.3.6.1.4.1.9.9.126.1.2.1.1.4 csApsArchMode readwrite onePlusOne(1), oneToOne(2), anexBOnePlusOne(3), ycableOnePlusOneNok1k2(4), straightOnePlusOneNok1k2(5)
1.3.6.1.4.1.9.9.126.1.2.1.1.5 csApsActiveLine readonly csApsWorkingLine(1), csApsProtectionLine(2), csApsNone(3)
1.3.6.1.4.1.9.9.126.1.2.1.1.6 csApsSigFaultBER readwrite Unknown
1.3.6.1.4.1.9.9.126.1.2.1.1.7 csApsSigDegradeBER readwrite Unknown
1.3.6.1.4.1.9.9.126.1.2.1.1.8 csApsWaitToRestore readwrite Unknown
1.3.6.1.4.1.9.9.126.1.2.1.1.9 csApsDirection readwrite uniDirectional(1), biDirectional(2)
1.3.6.1.4.1.9.9.126.1.2.1.1.10 csApsRevertive readwrite nonrevertive(1), revertive(2)
1.3.6.1.4.1.9.9.126.1.2.1.1.11 csApsDirectionOperational readonly uniDirectional(1), biDirectional(2)
1.3.6.1.4.1.9.9.126.1.2.1.1.12 csApsArchModeOperational readonly onePlusOne(1), oneToOne(2), anexBOnePlusOne(3), ycableOnePlusOneNok1k2(4), straightOnePlusOneNok1k2(5)
1.3.6.1.4.1.9.9.126.1.2.1.1.13 csApsChannelProtocol readwrite bellcore(1), itu(2)
1.3.6.1.4.1.9.9.126.1.2.1.1.14 csApsFailureStatus readonly CsApsLineFailureStatus
1.3.6.1.4.1.9.9.126.1.2.1.1.15 csApsSwitchReason readonly CsApsLineSwitchReason
1.3.6.1.4.1.9.9.126.1.2.1.1.16 csApsPrimarySection readonly workingSection1(1), workingSection2(2), none(3)

Used by conformance groups

2 objects
  • 1.3.6.1.4.1.9.9.126.3.2.4 ciscoSonetApsMIBGroup
  • 1.3.6.1.4.1.9.9.126.3.2.5 ciscoSonetApsMIBGroup1

Comments