cdot3OamAdminState
This object is used to provision the default administrative OAM mode for this interface. This object represents the desired state of OAM for this interface. The cdot3OamAdminState always starts in the disabled(1) state until an explicit management action or configuration information retained by the system causes a transition to the enabled(2) state. When enabled(2), Ethernet OAM will attempt to operate over this interface.
This OID is also declared by other modules:
CISCO-DOT3-OAM-MIB
Details
Possible values
| 1 | disabled |
| 2 | enabled |
Reference
[802.3ah], 30.3.6.1.2
Table columns
12 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.4.1.9.10.136.1.1.1.1 | cdot3OamAdminState | readwrite | disabled(1), enabled(2) |
| 1.3.6.1.4.1.9.10.136.1.1.1.1 | cdot3OamAdminState | readwrite | disabled(1), enabled(2) |
| 1.3.6.1.4.1.9.10.136.1.1.1.2 | cdot3OamOperStatus | readonly | disabled(1), linkFault(2), passiveWait(3), activeSendLocal(4), sendLocalAndRemote(5), sendLocalAndRemoteOk(6), oamPeeringLocallyRejected(7), oamPeeringRemotelyRejected(8), operational(9), nonOperHalfDuplex(10) |
| 1.3.6.1.4.1.9.10.136.1.1.1.2 | cdot3OamOperStatus | readonly | disabled(1), linkFault(2), passiveWait(3), activeSendLocal(4), sendLocalAndRemote(5), sendLocalAndRemoteOk(6), oamPeeringLocallyRejected(7), oamPeeringRemotelyRejected(8), operational(9), nonOperHalfDuplex(10) |
| 1.3.6.1.4.1.9.10.136.1.1.1.3 | cdot3OamMode | readwrite | active(1), passive(2) |
| 1.3.6.1.4.1.9.10.136.1.1.1.3 | cdot3OamMode | readwrite | active(1), passive(2) |
| 1.3.6.1.4.1.9.10.136.1.1.1.4 | cdot3OamMaxOamPduSize | readonly | Unknown |
| 1.3.6.1.4.1.9.10.136.1.1.1.4 | cdot3OamMaxOamPduSize | readonly | Unknown |
| 1.3.6.1.4.1.9.10.136.1.1.1.5 | cdot3OamConfigRevision | readonly | Unknown |
| 1.3.6.1.4.1.9.10.136.1.1.1.5 | cdot3OamConfigRevision | readonly | Unknown |
| 1.3.6.1.4.1.9.10.136.1.1.1.6 | cdot3OamFunctionsSupported | readonly | Unknown |
| 1.3.6.1.4.1.9.10.136.1.1.1.6 | cdot3OamFunctionsSupported | readonly | Unknown |
Used by conformance groups
1 objects- 1.3.6.1.4.1.9.10.136.2.1.1 cdot3OamControlGroup