tmnxHwOperState

  • 1.3.6.1.4.1.6527.3.1.2.2.1.8.1.16
  • Access readonly
  • Type unknown(1), inService(2), outOfService(3), diagnosing(4), failed(5), booting(6), empty(7), provisioned(8), unprovisioned(9), upgrade(10), downgrade(11), inServiceUpgrade(12), inServiceDowngrade(13), resetPending(14)

The actual operational status of this hardware component. unknown (1) Status cannot be determined inService (2) Online - If tmnxHwClass has a value of 'ioModule (8)' or 'cpmModule (9), the card is present, booted, configured, and running. outOfService (3) Ready - The hardware component is OK but is down because tmnxHwAdminState has a value of 'outOfService (3)'. diagnosing (4) Not implemented. failed (5) This hardware component has failed. The value of tmnxHwFailureReason indicates the type of failure. If tmnxHwClass has a value of 'ioModule(8)' or 'cpmModule(9)', there is a card in the slot but it has failed. booting (6) A card is in the transitional startup state. empty (7) There is no card in the slot and it has not been pre-configured. provisioned (8) There is no card in the slot but it has been pre-configured. unprovisioned (9) There is a card in the slot but it is not configured. upgrade (10) Card software version is compatible with and newer than that running on the current active CPM. downgrade (11) Card software version is compatible with and older than that running on the current active CPM. inServiceUpgrade (12) Card is inService and the card software version is compatible with and newer than that running on the current active CPM. This state applies only to a standby CPM card. This enumeration is no longer supported as of release 5.0. inServiceDowngrade (13) Card is inService and the card software is compatible with and older than that running on the current active CPM. This state applies only to a standby CPM card. This enumeration is no longer supported as of release 5.0. resetPending (14) Card is awaiting reset following an upgrade or downgrade activity switch. The card software version is upgrade or downgrade compatible but will be reset in order to update it to match the active CPM software. The value of tmnxChassisUpdateWaitTime indicates the how long the system will wait following an upgrade or downgrade activity switch before it resets IOM cards. This state applies only to IOM cards. This enumeration is no longer supported as of release 5.0.

This OID is also declared by other modules: TIMETRA-CHASSIS-MIB

Details

Possible values
1 unknown
2 inService
3 outOfService
4 diagnosing
5 failed
6 booting
7 empty
8 provisioned
9 unprovisioned
10 upgrade
11 downgrade
12 inServiceUpgrade
13 inServiceDowngrade
14 resetPending

Table columns

30 objects
Oid Name Access Type
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.1 tmnxHwIndex noaccess TmnxHwIndex
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.2 tmnxHwID readonly RowPointer
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.3 tmnxHwMfgString readonly Unknown
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.4 tmnxHwMfgBoardNumber readonly Unknown
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.5 tmnxHwSerialNumber readonly Unknown
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.6 tmnxHwManufactureDate readonly Unknown
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.7 tmnxHwClass readonly TmnxHwClass
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.8 tmnxHwName readonly TNamedItemOrEmpty
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.9 tmnxHwAlias readwrite TNamedItemOrEmpty
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.10 tmnxHwAssetID readwrite SnmpAdminString
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.11 tmnxHwCLEI readonly Unknown
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.12 tmnxHwIsFRU readonly TruthValue
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.13 tmnxHwContainedIn readonly Unknown
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.14 tmnxHwParentRelPos readonly Unknown
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.15 tmnxHwAdminState readwrite noop(1), inService(2), outOfService(3), diagnose(4), operateSwitch(5)
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.16 tmnxHwOperState readonly unknown(1), inService(2), outOfService(3), diagnosing(4), failed(5), booting(6), empty(7), provisioned(8), unprovisioned(9), upgrade(10), downgrade(11), inServiceUpgrade(12), inServiceDowngrade(13), resetPending(14)
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.17 tmnxHwTempSensor readonly TruthValue
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.18 tmnxHwTemperature readonly Integer32
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.19 tmnxHwTempThreshold readonly Integer32
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.20 tmnxHwBootCodeVersion readonly DisplayString
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.21 tmnxHwSoftwareCodeVersion readonly DisplayString
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.22 tmnxHwSwLastBoot readonly DateAndTime
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.23 tmnxHwSwState readonly unknown(0), hwFailure(1), swFailure(2), hwInitting(3), swDownloading(4), swInitting(5), swInitted(6), swRunning(7)
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.24 tmnxHwAlarmState readonly TmnxAlarmState
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.25 tmnxHwLastAlarmEvent readonly RowPointer
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.26 tmnxHwClearAlarms readwrite TmnxActionType
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.27 tmnxHwSwImageSource readonly unknown(0), primary(1), secondary(2), tertiary(3)
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.28 tmnxHwMfgDeviations readonly SnmpAdminString
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.29 tmnxHwBaseMacAddress readonly MacAddress
1.3.6.1.4.1.6527.3.1.2.2.1.8.1.30 tmnxHwFailureReason readonly DisplayString

Used by notifications

3 objects
  • 1.3.6.1.4.1.6527.3.1.3.2.1.0.7 tmnxEqCardFailure
  • 1.3.6.1.4.1.6527.3.1.3.2.1.0.32 tmnxEqFlashDataLoss
  • 1.3.6.1.4.1.6527.3.1.3.2.1.0.33 tmnxEqFlashDiskFull

Used by conformance groups

2 objects
  • 1.3.6.1.4.1.6527.3.1.1.2.1.2.9 tmnxChassisV3v0Group
  • 1.3.6.1.4.1.6527.3.1.1.2.1.2.16 tmnxChassisV5v0Group

Comments

Parent

Advertisement