juniV35IfClockRate
The clock rate setting in hertz for this X.21/V.35 interface. Only the following values are valid: 1200, 2400, 4800, 9600, 19200, 38400, 56000, 64000, 128000, 1024000, 1536000, 2048000, 3072000, 4096000, 4915200, 6144000, and 8192000. If a value other than one of the predefined values is set, then the closest matching value is used. The clock rate parameter is only meaningful when the interface is in DCE mode. When the interface is in DTE mode, the value is simply ignored.
This OID is also declared by other modules:
Unisphere-Data-V35-MIB
Table columns
8 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.59.1.2.1.1 | juniV35IfIndex | noaccess | InterfaceIndex |
| 1.3.6.1.4.1.4874.2.2.59.1.2.1.2 | juniV35IfType | readonly | x21(0), v35(1), interfaceTypeNoCable(2) |
| 1.3.6.1.4.1.4874.2.2.59.1.2.1.3 | juniV35IfMode | readonly | dte(0), dce(1), interfaceModeNoCable(2) |
| 1.3.6.1.4.1.4874.2.2.59.1.2.1.4 | juniV35IfClockRate | readwrite | Unsigned32 |
| 1.3.6.1.4.1.4874.2.2.59.1.2.1.5 | juniV35IfNrzEncoding | readwrite | normal(0), inverted(1) |
| 1.3.6.1.4.1.4874.2.2.59.1.2.1.6 | juniV35IfTxClock | readwrite | normal(0), inverted(1) |
| 1.3.6.1.4.1.4874.2.2.59.1.2.1.7 | juniV35IfIgnoreDcd | readwrite | ignoredNone(0), dcdIgnored(1), linkStateIgnored(2) |
| 1.3.6.1.4.1.4874.2.2.59.1.2.1.8 | juniV35IfLoopback | readwrite | none(0), loopback(1) |
Used by conformance groups
1 objects- 1.3.6.1.4.1.4874.2.2.59.4.2.1 juniV35Group