CiscoOptionalFeature

• Base type Enumeration

The optional features in the sytem. ivr(1) - Inter VSAN Routing fcip(2) - Fibre Channel over IP Protocol fcsp(3) - Fibre Channel Security Protocol ficon(4) - Fibre Connectivity interface iscsi(5) - iSCSI (Internet Small Computer System Interface) protocol tacacs(6) - Tacacs+ AAA protocol qosManager(7) - Quality Of Service portSecurity(8) - Port Security fabricBinding(9) - Fabric Binding iscsiInterfaceVsanMembership(10) - iSCSI-Interface-VSAN membership ike(11) - Internet Key Exchange feature. This is used to negotiate cryptographic keys for IPsec traffic isns(12) - iSNS (Internet Storage Name Service) server. This provides name service, access control and state change notifications for iSCSI devices ipsec(13) - IPSec security services on the device portTracker(14) - Port Tracker. This allows ports to be brought down and up based on changes in the port states of certain configured (tracked) ports scheduler(15) - Scheduler feature provides jobs to be scheduled at a specified time. A Job is a collection of configuration commands in the device. npiv(16) - Nx_Port ID Virtualization. This is a mechanism by which a N_Port can get more than one Nx_Port_Id from the fibre channel (FC) fabric sanExtTuner(17) - SAN Extension Tuner. This is a tool used to generate and analyze SCSI workloads across the FCIP tunnels. This can be used to tune the FCIP tunnels for desired throughput. dpvm(18) - Dynamic Port Vsan Membership. This manages allocation of VSAN to a port based on the device WWN at the time of device FLOGI extenedCredit(19) - Extended Credit feature. This provides a way to increase the receive buffer to buffer credits on physical FC Ports cloudDiscovery(20)- This feature provides grouping functionality of all the IP networks connected to the various gigabit ethernet interfaces in a 'Fabric' isis(21) - IS-IS Unicast Routing Protocol ospf(22) - Open Shortest Path First Unicast Routing Protocol ospfV3(23) - Open Shortest Path First Version 3 Unicast Routing Protocol rip(24) - Routing Information Protocol bgp(25) - Border Gateway Protocol pim(26) - Protocol Independent Multicast igmp(27) - Internet Group Management Protocol msdp(28) - Multicast Source Discovery Protocol pim6(29) - Protocol Independent Multicast (PIM) for IPv6 eigrp(30) - Enhanced Interior Gateway Routing Protocol sdv(31) - SAN Device-Virtualization Manager cluster(32) - This feature provides a common infrastructure for distributed applications running on multiple switches. It provides consistency and replication of application metadata. It also handles membership and quorum service. sme(33) - SME Daemon lacp(34) - Link Aggregation Control Protocol amt(35) - Auto-Multicast Tunneling dot1x(36) - DOT1X Daemon npv(37) - FC N_port Multiplexer allows multiple end-devices on a switch which does not require a domain_ID to login to a NPIV-capable switch and thereby communicate with other devices in the fabric. l2nac(38) - L2NAC Daemon glbp(39) - Gateway Load Balancing Protocol. This protocol provides support for gateway redundancy and in load balancing traffic. dhcpSnooping(40) - Handles dhcp snooping, IP source guard and Dynamic ARP Inspection (DAI) functionality. hsrp(41) - The Hot Standby Router Protocol, HSRP, provides a mechanism which is designed to support non-disruptive failover of IP traffic in certain circumstances. In particular, the protocol protects against the failure of the first hop router when the source host cannot learn the IP address of the first hop router dynamically. svi(42) - Switch Virtual Interface Manager vmm(43) - Virtual Module Manager pvlan(44) - Private Vlan Manager tunnelManager(45) - Tunnel manager manages tunnel interfaces which includes creation, configuration and deletion of a tunnel interface. ethPortSec(46) - Ethernet Port Security provides a MAC based security feature for L2 ports. lisp(47) - Locator ID Separation Protocol trustSec(48) - Cisco TrustSec. Provides authentication, authorization, encryption and SGACLs (Security Group Access Control Lists). copp(49) - Control Plane Policing. udld(50) - Unidirectional link-detection to ensure ethernet link is working properly mcecm(51) - Multi-Chassis Ether-Channel Manager pbr(52) - PBR uses route-maps to provide policy based routing functionality. nfm(53) - NetFlow provides a key set of services for IP applications, including network traffic accounting, usage-based network billing, network planning, security, Denial of Service monitoring capabilities, and network monitoring. NetFlow provides valuable information about network users and applications, peak usage times, and traffic routing. isapi(54) - This service is a conditional service and enables the various storage applications running on the ISAPI (Intelligent Switch API). vrrp(55) - The Virtual Router Redundancy Protocol, VRRP, provides a mechanism to eliminate the single point of failure as present in default static routed environments. Redundancy is provided in using any of the virtual router's IP addresses as the default first hop router by hosts in the LAN. netSift(56) - Enable Netsift features of DPI (Deep Packet Inspection) and measurements. isisL2(57) - This feature implements the control plane for DCE (Data Center Ethernet). It provides both unicast and multicast routes to the RIBs (Routing Information Bases) for forwarding DCE frames. cimServer(58) - CISCO's Web Based Enterprise Management (WBEM) Services daemon process. otv(59) - This feature is provides control plane functionality for OTV (Overlay Transport Virtualization). sanTap(60) - SanTap is a fibre channel switch based capability that provides a reliable copy of the data flowing between a set of one or more initiators and a set of one or more targets connected to the fabric. nasb(61) - The TPC (Third-party Copy) or NASB (Network Accelerated Serverless Backup) feature exposes a disk target with Logical Unit Number(LUN) 0 that is capable of processing the SCSI Extended Copy Command (XCOPY) to transfer data from a specified source to a specified destination. dmm(62) - DMM (Data Migration Manager) facilitates migration of data from one storage subsystem to another. u2rib(63) - Layer 2 unicast Routing Information Base component. isisOtv(64) - IS-IS protocol for OTV (Overlay Transport Virtualization) orib(65) - OTV (Overlay Transport Virtualization) Routing Information Base fcoe(66) - Fiber Channel over Ethernet. siaServiceBroker(67) - Nexus Service Insertion Architecture. evfp(68) - Trunking F_Ports and F_Port-Channels. vtp(69) - Vlan Trunking Protocol splitter(70) - FCoE (Fiber Channel over Ethernet) traffic splitter sfm(71) - SCSI (Small Computer serial interface) flow manager used for enabling Fibre Channel Write Acceleration on SSM (Storage Services Module) cards ioa(72) - This feature allows more flexible I/O acceleration services such as write acceleration or tape acceleration telnetServer(73) - Telnet Server sshServer(74) - SSH Server httpServer(75) - HTTP Server wccp(76) - Web Cache Communication Protocol for Nexus7k siaSve(77) - SIA Services Virtualization Endpoint xcvrFreq (78) - X2 Transceiver Frequency configuration assocMgr(79) - The feature enables VLAN <--> VSAN translation and acts as a bridge between LAN and SAN world. It manages the mappings of VLANs with associated VSANs and vice versa lldp(80) - Link Layer Discovery Protocol rsvp(81) - Implements the RSVP protocol that is used to make resource reservations for an application for example MPLS/TE ldp(82) - MPLS Label Distribution Protocol te(83) - MPLS Traffic Engineering mplsOam(84) - MPLS Operations and Management l2vpn(85) - Layer2 VPN drap(86) - DRAP bfd(87) - BFD bfdApp(88) - BFD_APP fex(89) - FEX pong(90) - Layer 2 connectivity and latency measurement tool based on 1588 constructs rtp(91) - Real-time Transport Protocol ldap(92) - Lightweight Directory Access Protocol privilege(93) - Enable IOS like privilege support for authorization oim(94) - The interface manager for advanced features like OTV, TE, mVPN etc mplsMgr(95) - Manages general MPLS related functionality ulib(96) - Unified label information base responsible for the storage of MPLS label forwarding information scp(97) - scp protocal sftp(98) - sftp protocal l3vpn(99) - Layer 3 Virtual Private Networks mvpn(101) - Provides multicast service if customer sites are partitioned ipPool(102) - Creates and manages the IP Address uufb(103) - Unknown Unicast Flood Blocking umfb(104) - Unknown Multicast Flood Blocking ethernetNpv(105) - An enhanced form of FIP snooping over an ethernet bridge connecting FCoE hosts to FCoE FCF wccpClient(106) - Web Cache Communication Protocol Client Side scadaGw(107) - scada protocol translations poe(108) - Power over Ethernet flexlink(109) - Manager process for switchport backup feature niv(110) - Network Interface Virtualization vem(111) - Virtual Ethernet Module ewise(112) - Energywise for N7K onep(113) - Allows third parties to create network applications slaS(114) - SLA sender slaR(115) - SLA receiver rise(116) - rise feature enables tighter integration with the Nexus 7000 for attached Cisco appliances that support Remote Integrated Service Extenders (RISE) functionality pppManager(117) - Point-to-point protocol manager creates and manages of Point-to-Point protocol instances itronMcastAgent(118) - This is a process listens for multicast traffic and implement the itron specify reliability protocol over smart grid RF networks vsmAggregation(119) - VSM aggregation feature on Cisco Nexus 1000v enables multiple N1K control planes to be combined to manage a single DVS (distributed virtual switch) segmentation(120) - Vxlan feature on Cisco Nexus 1000v enables scalable cloud architecture with replicated server pods in different subnets. It provides a means to stretch a layer 2 network by using a layer 2 overlay scheme over a layer 3 network vrrpv3(121) - The Virtual Router Redundancy Protocol version 3, dynamically assign responsibility for routing to one of a group of routers participating in the protocol. VRRPv3 supports both IPv4 and IPv6 vTracker(122) - vTracker feature allows network-admin to view and monitor the virtualized environment in a data-center network. It also enables the network-admin to get the attributes of servers and virtual machines from the hypervisor management framework such as Vcenter for VMware. fdmi(123) - FDMI feature allows network-admin to view and monitor Fabric devices like Host Bus Adaptors in a data center network. cmm(124) - Cable Management Manager feature on allows auto detection of cabling errors in clos and non-clos network designs. ntp(125) - Network Time Protocol feature allows clock synchronization of router to other servers and clients. fabricAccess(126) - Single point of Access feature for the Fabric Network. nat(127) - IP Network Address Translation Manager vlanVnSeg(128) - Vlan based vn-segment is a simplified multi-tenancy solution in Vinci. This allows Vinci to support more than 4k tenants for the whole network but with limit(<4k) for each leaf node. bulkStat(129) - Bulk Stats Collection and Export feature is a solution to collect bulk/stats and export to NMS. This feature uses CM services to collect data and transfers raw and processed date to NMS. bbu(130) - BBU is a Battery Backup Unit support feature on Smart Grid platforms. vnSegment(131) - Multi-Tenancy and Virtual Network Segment(VN-Segment) allows the creation of virtual network segments to facilitate the creation and operation of virtual data centers. evb(132) - Edge Virtual Bridge feature is based on 802.1Qbg and defines the interaction between virtual switching environments in a hypervisor and the first-layer in a switching environment. ngMvpn(134) - Next Generation MVPN features. hmm(135) - Host Mobility Manager maintains local and 'remote interest' host database, detects and tracks host/VM movement. vxlan(136) - Virtual Extensible LAN feature is an encapsulation protocol for running an overlay network on existing Layer 3 infrastructure. mvrp(137) - MVRP feature is an industry standard vlan-pruning protocol. It helps in filtering unrequited traffic downstream. evmed(138) - EVMED feature allows network-admin to use EEM to monitor Application, Interface Statistics and TImer based events and schedule actions on occurance of those events nSegMgr(139) - Manage bridge domains as objects, exposing them by providing APIs to external virtualization servers such as VMware vCloud Director, Virtual Machine Manager Openstack Quantum and Horizon. vff(140) - Dynamic Forwarding Automation sol(141) - Serial over LAN provides a mechanism which enables the serial controller of a managed system to be redirected over an IPMI session using LAN packets. nxapi(143) - nxapi feature exposes CLIs that traditionally run on the switch to the outside of the switch through HTTP/HTTPs. itd(144) - With Intelligent Traffic Director(ITD), customer can deploy service appliances from any vendors with no Network/Topology change. vmTracker(145) - vmTracker tracks all the virtual machines in a given system. xosFeatureTest(146) - To test single instance feature. xosMIFeatureTest(147) - To test multi instance feature. nxschema(148) - Provide schema documentation for any XMLised command. mplsStatic(149) - Static LSP support for IPv4 and IPv6 next hops. imp(150) - IMP feature is used in OSPFv3 for IPSEC security. evc(151) - Ethernet Virtual Connection. ptp(152) - Precision Time protocol. bashShell(153) - Access Bourne-Again Shell. nxdb(154) - Native XML Database. ngoam(155) - Next generation OAM functionality. mld(156) - Multicast listener discovery protocol. evpn(157) - For the evpn feature. That box is evpn capable. smartChannel(158) - smartChannel is a layer 2 traffic redirection. openFlow(159) - OpenFlow is a SDN protocol that enables the SDN Controller to interact with the forwarding plane. mplsSegmentRouting(160) - This feature enables segment-routing over mpls. analytics(161) - Feature to support analytics module that facilitates Tetration analytics. ipp(162) - Interconnect Policy Provisioning feature to automate configuration of DCI switch via policy modeling objects notification. licenseSmart(163) - Smart Licensing is a way of licensing that simplifies the licensing experience across the enterprise and adds flexibility. pmn(164) - On the leaf, this feature manages the uplink bandwidth to spine for multiple multicast traffic streams so that no link is over-subscribed while sending traffic to or receiving traffic from the spine. dpt(165) - Programmatic way to configure packet tracing for a particular flow on a given switch. ngmvpn(166) - Next generation MVPN. dciTunnelInterop(167) - This feature enables interop between various tunnels. fabricTelemetry(168) - Feature for collecting analytics for TCP/CPU/IO. plb(169) - This feature provides the capability to do server and appliance load-balancing across a Programmable Fabric built with the Nexus Switches. vmis(170) - This would facilitate the identification of the virtual machines running on the host, which can be used for VM statistics collection, VM monitoring, Slow drain. ldbmgr(171) - To keep track of adjacency found in CDP, LLDP etc for higher level consumption. icam(172) - ICAM is a TCAM Analytics Feature, which gets all the information about the TCAM. catena(173) - Catena is a feature which aids in chaining of network appliances so that packets are redirected through multiple set of devices. licensePlr(174) - Permanent License Reservation is a set of capabilities that have been designed for highly secure environments where communications with outside environments is difficult to impossible. poap(200) - Power-On Auto Provisioning. sflow(264) - Feature SFLOW. elo(9875) - Feature ELO. .