pagpDistributionAlgorithm

  • 1.3.6.1.4.1.9.9.98.1.2.1.1.5
  • Access readonly
  • Type DisplayString

pagpDistributionAlgorithm describes, in human terms, the method used on this interface's agport to distribute outgoing data frames among its component interfaces. 'Source MAC address', 'Source and Destination MAC addresses', or 'IP flow: Source, Destination, protocol type' might be typical values for pagpDistributionAlgorithm. If the interface is not aggregated with an agport (pagpGroupIfIndex contains either 0 or the interface's own ifIndex), pagpDistributionAlgorithm may contain a DisplayString of length 0. See the managed device's operation manual to determine the exact meaning of the information supplied in this variable. A device may implement more than one algorithm; selecting among those algorithms is not possible within this MIB. The maximum length of this DisplayString is 255 octets.

This OID is also declared by other modules: CISCO-PAGP-MIB

Table columns

30 objects
Oid Name Access Type
1.3.6.1.4.1.9.9.98.1.2.1.1.1 pagpOperationMode readwrite PagpOperationMode
1.3.6.1.4.1.9.9.98.1.2.1.1.2 pagpPortState readonly portDown(1), portUp(2), dataReceived(3), upData(4), pagpReceived(5), biDirectional(6), upPagp(7), upMult(8)
1.3.6.1.4.1.9.9.98.1.2.1.1.3 pagpLastStateChange readonly TimeStamp
1.3.6.1.4.1.9.9.98.1.2.1.1.4 pagpHelloFrequency readonly fast(1), slow(2)
1.3.6.1.4.1.9.9.98.1.2.1.1.5 pagpDistributionAlgorithm readonly DisplayString
1.3.6.1.4.1.9.9.98.1.2.1.1.6 pagpPartnerCount readonly none(1), one(2), many(3)
1.3.6.1.4.1.9.9.98.1.2.1.1.7 pagpPartnerDeviceId readonly MacAddress
1.3.6.1.4.1.9.9.98.1.2.1.1.8 pagpPartnerLearnMethod readonly PagpLearnMethod
1.3.6.1.4.1.9.9.98.1.2.1.1.9 pagpPartnerPortPriority readonly PagpPortPriority
1.3.6.1.4.1.9.9.98.1.2.1.1.10 pagpPartnerIfIndex readonly InterfaceIndexOrZero
1.3.6.1.4.1.9.9.98.1.2.1.1.11 pagpPartnerGroupCapability readonly PagpGroupCapability
1.3.6.1.4.1.9.9.98.1.2.1.1.12 pagpPartnerGroupIfIndex readonly InterfaceIndexOrZero
1.3.6.1.4.1.9.9.98.1.2.1.1.13 pagpPartnerDeviceName readonly DisplayString
1.3.6.1.4.1.9.9.98.1.2.1.1.14 pagpPartnerPortName readonly DisplayString
1.3.6.1.4.1.9.9.98.1.2.1.1.15 pagpPartnerAgportMACAddress readonly MacAddress
1.3.6.1.4.1.9.9.98.1.2.1.1.1 pagpOperationMode readwrite PagpOperationMode
1.3.6.1.4.1.9.9.98.1.2.1.1.2 pagpPortState readonly portDown(1), portUp(2), dataReceived(3), upData(4), pagpReceived(5), biDirectional(6), upPagp(7), upMult(8)
1.3.6.1.4.1.9.9.98.1.2.1.1.3 pagpLastStateChange readonly TimeStamp
1.3.6.1.4.1.9.9.98.1.2.1.1.4 pagpHelloFrequency readonly fast(1), slow(2)
1.3.6.1.4.1.9.9.98.1.2.1.1.5 pagpDistributionAlgorithm readonly DisplayString
1.3.6.1.4.1.9.9.98.1.2.1.1.6 pagpPartnerCount readonly none(1), one(2), many(3)
1.3.6.1.4.1.9.9.98.1.2.1.1.7 pagpPartnerDeviceId readonly MacAddress
1.3.6.1.4.1.9.9.98.1.2.1.1.8 pagpPartnerLearnMethod readonly PagpLearnMethod
1.3.6.1.4.1.9.9.98.1.2.1.1.9 pagpPartnerPortPriority readonly PagpPortPriority
1.3.6.1.4.1.9.9.98.1.2.1.1.10 pagpPartnerIfIndex readonly InterfaceIndexOrZero
1.3.6.1.4.1.9.9.98.1.2.1.1.11 pagpPartnerGroupCapability readonly PagpGroupCapability
1.3.6.1.4.1.9.9.98.1.2.1.1.12 pagpPartnerGroupIfIndex readonly InterfaceIndexOrZero
1.3.6.1.4.1.9.9.98.1.2.1.1.13 pagpPartnerDeviceName readonly DisplayString
1.3.6.1.4.1.9.9.98.1.2.1.1.14 pagpPartnerPortName readonly DisplayString
1.3.6.1.4.1.9.9.98.1.2.1.1.15 pagpPartnerAgportMACAddress readonly MacAddress

Used by conformance groups

1 objects
  • 1.3.6.1.4.1.9.9.98.3.2.2 ciscoPagpPagpGroupV1R1

Comments