cvaIfEMCfgSignalType
The signaling type of E&M tie trunk interface. winkStart - the calling side seizes the line by going off-hook on its E lead but waits for a short off-hook 'wink' indication on its M lead from the called side before sending address information as DTMF digits. immediateDial - the calling side seizes the line by going off-hook on its E lead and sends sends address information as DTMF digits. delayDial - the calling side seizes the line by going off-hook on its E lead. After a timing interval, the calling side looks at the supervision from the called side. If the supervision is on-hook, the calling side starts sending information as DTMF digits; otherwise, the calling side waits until the called side goes on-hook and then starts sending address information. lmr - the e&m port is used to interface with Land Mobil Radio system. The e-lead and m-lead are not used in the traditional way. fgd - Feature Group D is an access switched services that provides access to Local Exchange Carrier of the public switched network. It is supported in North America only based on E&M wink-start. fgd-eana - Exchange Access North American signalling protocol of Feature Group D.
Details
| 1 | winkStart |
| 2 | immediateDial |
| 3 | delayDial |
| 4 | lmr |
| 5 | fgd |
| 6 | fgd-eana |
EIA/TIA-464B: Sections 4.1.3.4.1 Signaling Protocols.
Table columns
14 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.4.1.9.9.62.1.2.1.1.1 | cvaIfEMCfgSignalType | readwrite | winkStart(1), immediateDial(2), delayDial(3), lmr(4), fgd(5), fgd-eana(6) |
| 1.3.6.1.4.1.9.9.62.1.2.1.1.1 | cvaIfEMCfgSignalType | readwrite | winkStart(1), immediateDial(2), delayDial(3), lmr(4), fgd(5), fgd-eana(6) |
| 1.3.6.1.4.1.9.9.62.1.2.1.1.2 | cvaIfEMCfgOperation | readwrite | twoWires(1), fourWires(2) |
| 1.3.6.1.4.1.9.9.62.1.2.1.1.2 | cvaIfEMCfgOperation | readwrite | twoWires(1), fourWires(2) |
| 1.3.6.1.4.1.9.9.62.1.2.1.1.3 | cvaIfEMCfgType | readwrite | typeI(1), typeII(2), typeIII(3), typeIV(4), typeV(5) |
| 1.3.6.1.4.1.9.9.62.1.2.1.1.3 | cvaIfEMCfgType | readwrite | typeI(1), typeII(2), typeIII(3), typeIV(4), typeV(5) |
| 1.3.6.1.4.1.9.9.62.1.2.1.1.4 | cvaIfEMCfgDialType | readwrite | InterfaceDialType |
| 1.3.6.1.4.1.9.9.62.1.2.1.1.4 | cvaIfEMCfgDialType | readwrite | InterfaceDialType |
| 1.3.6.1.4.1.9.9.62.1.2.1.1.5 | cvaIfEMCfgLmrMCap | readwrite | inact(1), audio(2), dial(3) |
| 1.3.6.1.4.1.9.9.62.1.2.1.1.5 | cvaIfEMCfgLmrMCap | readwrite | inact(1), audio(2), dial(3) |
| 1.3.6.1.4.1.9.9.62.1.2.1.1.6 | cvaIfEMCfgLmrECap | readwrite | seize(4), voice(5), inactive(6) |
| 1.3.6.1.4.1.9.9.62.1.2.1.1.6 | cvaIfEMCfgLmrECap | readwrite | seize(4), voice(5), inactive(6) |
| 1.3.6.1.4.1.9.9.62.1.2.1.1.7 | cvaIfEMCfgAutoGainControl | readwrite | TruthValue |
| 1.3.6.1.4.1.9.9.62.1.2.1.1.7 | cvaIfEMCfgAutoGainControl | readwrite | TruthValue |
Used by conformance groups
3 objects- 1.3.6.1.4.1.9.9.62.3.2.2 cvaIfEMGroup
- 1.3.6.1.4.1.9.9.62.3.2.6 cvaIfEMGroupRev1
- 1.3.6.1.4.1.9.9.62.3.2.7 cvaIfEMGroupRev2