clMeshLtDataRateValue

  • 1.3.6.1.4.1.9.9.606.1.2.1.1.9
  • Access readwrite
  • Type mbps1(1), mbps2(2), mbps5point5(3), mbps6(4), mbps9(5), mbps11(6), mbps12(7), mbps18(8), mbps24(9), mbps36(10), mbps48(11), mbps54(12), mbps108(13), htMcs0(14), htMcs1(15), htMcs2(16), htMcs3(17), htMcs4(18), htMcs5(19), htMcs6(20), htMcs7(21), htMcs8(22), htMcs9(23), htMcs10(24), htMcs11(25), htMcs12(26), htMcs13(27), htMcs14(28), htMcs15(29)

This object represents the data rate on backhaul link at which link test will be performed. Depending on the backhaul radio type, data rate will vary. If the value of clMeshNodeBackhaul object is 'dot11a', data rates can be one of the following possible values. mbps6(4) mbps9(5) mbps12(7) mbps18(8) mbps24(9) mbps36(10) mbps48(11) mbps54(12) mbps108(13) Additionally following data rates are supported if 802.11a supports 11n. htMcs0(14) htMcs1(15) htMcs2(16) htMcs3(17) htMcs4(18) htMcs5(19) htMcs6(20) htMcs7(21) htMcs8(22) htMcs9(23) htMcs10(24) htMcs11(25) htMcs12(26) htMcs13(27) htMcs14(28) htMcs15(29) If the value of clMeshNodeBackhaul object is 'dot11b', then data rate can be one of the following possible values. mbps1(1) mbps2(2) mbps5point5(3) mbps6(4) mbps9(5) mbps11(6) If the value of clMeshNodeBackhaul object is 'dot11g', then data rate can be one of the following possible values. mbps1(1) mbps2(2) mbps5point5(3) mbps6(4) mbps9(5) mbps11(6) mbps12(7) mbps18(8) mbps24(9) mbps36(10) mbps48(11) mbps54(12) mbps108(13) This object cannot be modified when the value of clMeshLtRowStatus object in the same row is 'active'.

Details

Possible values
1 mbps1
2 mbps2
3 mbps5point5
4 mbps6
5 mbps9
6 mbps11
7 mbps12
8 mbps18
9 mbps24
10 mbps36
11 mbps48
12 mbps54
13 mbps108
14 htMcs0
15 htMcs1
16 htMcs2
17 htMcs3
18 htMcs4
19 htMcs5
20 htMcs6
21 htMcs7
22 htMcs8
23 htMcs9
24 htMcs10
25 htMcs11
26 htMcs12
27 htMcs13
28 htMcs14
29 htMcs15

Table columns

9 objects
Oid Name Access Type
1.3.6.1.4.1.9.9.606.1.2.1.1.1 clMeshLtIndex noaccess Unknown
1.3.6.1.4.1.9.9.606.1.2.1.1.2 clMeshLtSrcMacAddress readwrite MacAddress
1.3.6.1.4.1.9.9.606.1.2.1.1.3 clMeshLtDestMacAddress readwrite MacAddress
1.3.6.1.4.1.9.9.606.1.2.1.1.4 clMeshLtDataRate readwrite Unsigned32
1.3.6.1.4.1.9.9.606.1.2.1.1.5 clMeshLtPktsPerSec readwrite Unknown
1.3.6.1.4.1.9.9.606.1.2.1.1.6 clMeshLtPktSize readwrite Unknown
1.3.6.1.4.1.9.9.606.1.2.1.1.7 clMeshLtDuration readwrite Unknown
1.3.6.1.4.1.9.9.606.1.2.1.1.8 clMeshLtRowStatus readwrite RowStatus
1.3.6.1.4.1.9.9.606.1.2.1.1.9 clMeshLtDataRateValue readwrite mbps1(1), mbps2(2), mbps5point5(3), mbps6(4), mbps9(5), mbps11(6), mbps12(7), mbps18(8), mbps24(9), mbps36(10), mbps48(11), mbps54(12), mbps108(13), htMcs0(14), htMcs1(15), htMcs2(16), htMcs3(17), htMcs4(18), htMcs5(19), htMcs6(20), htMcs7(21), htMcs8(22), htMcs9(23), htMcs10(24), htMcs11(25), htMcs12(26), htMcs13(27), htMcs14(28), htMcs15(29)

Used by conformance groups

1 objects
  • 1.3.6.1.4.1.9.9.606.2.2.3 ciscoLwappMeshLinkTestRunGroupRev1

Comments