cadpStatPathBIP8Errors
The Bit Interleaved Parity 8 is an error checking code applied for quick isolation of faults. Each bit in the B octets is set to 1 or 0 as necessary to obtain even parity over the previous frame. The calculated BIP-8 code for frame N is compared with the BIP-8 code extracted from the B3 byte of frame N+1. Differences indicate that a Path level bit error has occurred. Count of Path BIP-8 (Bit Interleaved Parity) errors that have been detected on this phy.
This OID is also declared by other modules:
CISCO-ATM-DUAL-PHY-MIB
Table columns
20 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.4.1.9.9.60.1.1.1.1.1 | cadpStatLossOfSignal | readonly | TruthValue |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.2 | cadpStatFarEndReceiveFailure | readonly | TruthValue |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.5 | cadpStatActive | readonly | TruthValue |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.6 | cadpStatSectionBIP8Errors | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.7 | cadpStatLineBIP824Errors | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.8 | cadpStatLineFEBErrors | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.9 | cadpStatPathBIP8Errors | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.10 | cadpStatPathFEBErrors | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.11 | cadpStatCorrectableHCSErrors | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.12 | cadpStatUncorrectableHCSErrors | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.1 | cadpStatLossOfSignal | readonly | TruthValue |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.2 | cadpStatFarEndReceiveFailure | readonly | TruthValue |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.5 | cadpStatActive | readonly | TruthValue |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.6 | cadpStatSectionBIP8Errors | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.7 | cadpStatLineBIP824Errors | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.8 | cadpStatLineFEBErrors | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.9 | cadpStatPathBIP8Errors | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.10 | cadpStatPathFEBErrors | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.11 | cadpStatCorrectableHCSErrors | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.12 | cadpStatUncorrectableHCSErrors | readonly | Counter32 |
Used by conformance groups
1 objects- 1.3.6.1.4.1.9.9.60.3.2.1 ciscoAtmDualPhyMIBGroup