bscPortPause
For primary, it is the minimum time to be taken for a cycle round the active poll table; if this time has not elapsed when the bottom of the poll table is reached, then polling will pause until this timer expires. A value of zero means there will be no pause between cycles round the poll table. For secondary, the pause time out is the delay taken before sending a response to a poll when it has no data frame to send. The units are tenths of a second. The default is 10 (1 second).
This OID is also declared by other modules:
CISCO-BSC-MIB
Table columns
28 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.4.1.9.9.36.1.1.1.1.1 | bscPortRole | readonly | primary(1), secondary(2), contention(3), dialContention(4), generic(5) |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.2 | bscPortCodeSet | readonly | ebcdic(1), ascii(2) |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.3 | bscPortPause | readonly | Unknown |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.4 | bscPortServlim | readonly | Unknown |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.5 | bscPortPollTimeout | readonly | Unknown |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.6 | bscPortRecoveryRetries | readonly | Unknown |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.7 | bscPortUnknownControlUnitsReceived | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.8 | bscPortSoftErrors | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.9 | bscPortHardErrors | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.10 | bscPortProtocolViolations | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.11 | bscPortHostTimeout | readonly | Unknown |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.12 | bscPortSpecPoll | readonly | TruthValue |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.13 | bscPortVirtualAddress | readonly | Unknown |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.14 | bscPortContentionDialTimeout | readonly | Unknown |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.1 | bscPortRole | readonly | primary(1), secondary(2), contention(3), dialContention(4), generic(5) |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.2 | bscPortCodeSet | readonly | ebcdic(1), ascii(2) |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.3 | bscPortPause | readonly | Unknown |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.4 | bscPortServlim | readonly | Unknown |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.5 | bscPortPollTimeout | readonly | Unknown |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.6 | bscPortRecoveryRetries | readonly | Unknown |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.7 | bscPortUnknownControlUnitsReceived | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.8 | bscPortSoftErrors | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.9 | bscPortHardErrors | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.10 | bscPortProtocolViolations | readonly | Counter32 |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.11 | bscPortHostTimeout | readonly | Unknown |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.12 | bscPortSpecPoll | readonly | TruthValue |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.13 | bscPortVirtualAddress | readonly | Unknown |
| 1.3.6.1.4.1.9.9.36.1.1.1.1.14 | bscPortContentionDialTimeout | readonly | Unknown |
Used by conformance groups
2 objects- 1.3.6.1.4.1.9.9.36.3.2.1 bscPortsGroup
- 1.3.6.1.4.1.9.9.36.3.2.3 bscPortsGroupRev1