stunRouteStationAddress

  • 1.3.6.1.4.1.9.9.30.1.4.1.1.1
  • Access noaccess
  • Type Unknown

The poll address of the station. 256 indicates the ALL parameter on the STUN ROUTE command, which is the route for all unrecognized addresses.

This OID is also declared by other modules: CISCO-STUN-MIB

Table columns

22 objects
Oid Name Access Type
1.3.6.1.4.1.9.9.30.1.4.1.1.1 stunRouteStationAddress noaccess Unknown
1.3.6.1.4.1.9.9.30.1.4.1.1.2 stunRouteType readonly other(1), ip(2), direct(3), frameRelay(4)
1.3.6.1.4.1.9.9.30.1.4.1.1.3 stunRouteRemoteIP readonly IpAddress
1.3.6.1.4.1.9.9.30.1.4.1.1.4 stunRouteSerialInterface readonly InterfaceIndex
1.3.6.1.4.1.9.9.30.1.4.1.1.5 stunRoutePriority readonly low(1), normal(2), medium(3), high(4)
1.3.6.1.4.1.9.9.30.1.4.1.1.6 stunRoutePeerState readonly dead(1), closed(2), opening(3), openWait(4), connected(5), direct(6)
1.3.6.1.4.1.9.9.30.1.4.1.1.7 stunRouteLocalAck readonly TruthValue
1.3.6.1.4.1.9.9.30.1.4.1.1.8 stunRouteRxPackets readonly Counter32
1.3.6.1.4.1.9.9.30.1.4.1.1.9 stunRouteTxPackets readonly Counter32
1.3.6.1.4.1.9.9.30.1.4.1.1.10 stunRouteRxBytes readonly Counter32
1.3.6.1.4.1.9.9.30.1.4.1.1.11 stunRouteTxBytes readonly Counter32
1.3.6.1.4.1.9.9.30.1.4.1.1.1 stunRouteStationAddress noaccess Unknown
1.3.6.1.4.1.9.9.30.1.4.1.1.2 stunRouteType readonly other(1), ip(2), direct(3), frameRelay(4)
1.3.6.1.4.1.9.9.30.1.4.1.1.3 stunRouteRemoteIP readonly IpAddress
1.3.6.1.4.1.9.9.30.1.4.1.1.4 stunRouteSerialInterface readonly InterfaceIndex
1.3.6.1.4.1.9.9.30.1.4.1.1.5 stunRoutePriority readonly low(1), normal(2), medium(3), high(4)
1.3.6.1.4.1.9.9.30.1.4.1.1.6 stunRoutePeerState readonly dead(1), closed(2), opening(3), openWait(4), connected(5), direct(6)
1.3.6.1.4.1.9.9.30.1.4.1.1.7 stunRouteLocalAck readonly TruthValue
1.3.6.1.4.1.9.9.30.1.4.1.1.8 stunRouteRxPackets readonly Counter32
1.3.6.1.4.1.9.9.30.1.4.1.1.9 stunRouteTxPackets readonly Counter32
1.3.6.1.4.1.9.9.30.1.4.1.1.10 stunRouteRxBytes readonly Counter32
1.3.6.1.4.1.9.9.30.1.4.1.1.11 stunRouteTxBytes readonly Counter32

Comments