cVoaDesiredPower
This object indicates the desired optical power level, after attenuation, at the interface. This object applies only when the cVoaAttenuationControlMode object is set to 'automatic'. In this mode, the attenuation level is continuously adjusted to maintain the desired power level, after attenuation, as specified by this object.
This OID is also declared by other modules:
CISCO-VOA-MIB
Details
Range
-1000 — -1000
Table columns
10 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.4.1.9.9.262.1.1.1.1.1 | cVoaDirection | noaccess | OpticalIfDirection |
| 1.3.6.1.4.1.9.9.262.1.1.1.1.1 | cVoaDirection | noaccess | OpticalIfDirection |
| 1.3.6.1.4.1.9.9.262.1.1.1.1.2 | cVoaAttenuationControlMode | readwrite | manual(1), automatic(2) |
| 1.3.6.1.4.1.9.9.262.1.1.1.1.2 | cVoaAttenuationControlMode | readwrite | manual(1), automatic(2) |
| 1.3.6.1.4.1.9.9.262.1.1.1.1.3 | cVoaAttenuation | readwrite | OpticalAttenInDb |
| 1.3.6.1.4.1.9.9.262.1.1.1.1.3 | cVoaAttenuation | readwrite | OpticalAttenInDb |
| 1.3.6.1.4.1.9.9.262.1.1.1.1.4 | cVoaAttenuationLastChange | readonly | TimeStamp |
| 1.3.6.1.4.1.9.9.262.1.1.1.1.4 | cVoaAttenuationLastChange | readonly | TimeStamp |
| 1.3.6.1.4.1.9.9.262.1.1.1.1.5 | cVoaDesiredPower | readwrite | OpticalPowerInDbm |
| 1.3.6.1.4.1.9.9.262.1.1.1.1.5 | cVoaDesiredPower | readwrite | OpticalPowerInDbm |
Used by conformance groups
1 objects- 1.3.6.1.4.1.9.9.262.3.2.1 cVoaMIBBaseGroup