cpaeAuthPaeState

• 1.3.6.1.4.1.9.9.220.1.10.1.8
• Access readonly
• Type other(1), initialize(2), disconnected(3), connecting(4), authenticating(5), authenticated(6), aborting(7), held(8), forceAuth(9), forceUnauth(10), guestVlan(11), authFailVlan(12), criticalAuth(13), ipAwaiting(14), policyConfig(15), authFinished(16), restart(17) ?

  other(1), initialize(2), disconnected(3), connecting(4), authenticating(5), authenticated(6), aborting(7), held(8), forceAuth(9), forceUnauth(10), guestVlan(11), authFailVlan(12), criticalAuth(13), ipAwaiting(14), policyConfig(15), authFinished(16), restart(17)

  This type is not a standard SMI/SNMP base type and is not defined as a documented TEXTUAL-CONVENTION in this MIB.

  It was extracted as raw syntax from the source MIB file and could not be resolved to a known type definition.

Indicates the current value of the Authenticator PAE state machine. other :None of the following states. initialize :The PAE state machine is being initialized. disconnected :An explicit logoff request is received from the Supplicant, or the number of permissible reauthentication attempts has been exceeded. connecting :Attempting to establish a communication with a Supplicant. authenticating:A Supplicant is being authenticated. authenticated :The Authenticator has successfully authenticated the Supplicant. aborting :The authentication process is prematurely aborted due to receipt of a reauthentication request, or an EAPOL-Start frame, or an EAPOL-Logoff frame, or an authTimeout. held :The state machine ignores and discards all EAPOL packets, so as to discourage brute force attacks. This state is entered from the 'authenticating' state following an authentication failure. At the expiration of the quietWhile timer, the state machine transitions to the 'connecting' state. forceAuth :The port is set to Authorized, and a canned EAP Success packet is sent to the Supplicant. forceUnauth :The port is set to Unauthorized, and a canned EAP Failure packet is sent to the Supplicant. If EAP-Start messages are received from the Supplicant, the state is re-entered and further EAP Failure messages are sent. guestVlan :The port has been moved to a configured Guest VLAN. authFailVlan :The port has been moved to a configured Authentication Failed VLAN. criticalAuth :The port is set to Authorized even though the RADIUS server is not reachable, or does not response. ipAwaiting :The port is waiting for an IP address from DHCP server. policyConfig :This state is entered from 'ipAwaiting' state if an IP address is received and the corresponding policies are being installed. authFinished :The port is set to Authorized by MAC Authentication Bypass feature. restart :The PAE state machine has been restarted.