coscpBundleRowStatus
This object is used to create a new row or to modify or delete an existing row in this table. Each row in the table must be created using this object. Once the row has been activated, an interface index is assigned by the agent and shown in coscpBundleIfIndex. This value can then be used by the manager to configure control and management protocols, e.g. to configure the OSC's IP address. After the row has been activated, this object cannot be set to any value other than 'destroy'. The row status never changes to 'notInService' after reaching the value 'active'.
This OID is also declared by other modules:
CISCO-OSCP-MIB
Table columns
12 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.4.1.9.9.202.1.3.1.1 | coscpBundleRemoteSwitchId | noaccess | CoscpSwitchId |
| 1.3.6.1.4.1.9.9.202.1.3.1.1 | coscpBundleRemoteSwitchId | noaccess | CoscpSwitchId |
| 1.3.6.1.4.1.9.9.202.1.3.1.2 | coscpBundleId | noaccess | CoscpBundleId |
| 1.3.6.1.4.1.9.9.202.1.3.1.2 | coscpBundleId | noaccess | CoscpBundleId |
| 1.3.6.1.4.1.9.9.202.1.3.1.3 | coscpBundleActivePortId | readonly | CoscpPortId |
| 1.3.6.1.4.1.9.9.202.1.3.1.3 | coscpBundleActivePortId | readonly | CoscpPortId |
| 1.3.6.1.4.1.9.9.202.1.3.1.4 | coscpBundleIfIndex | readonly | InterfaceIndex |
| 1.3.6.1.4.1.9.9.202.1.3.1.4 | coscpBundleIfIndex | readonly | InterfaceIndex |
| 1.3.6.1.4.1.9.9.202.1.3.1.5 | coscpBundlePortCount | readonly | Gauge32 |
| 1.3.6.1.4.1.9.9.202.1.3.1.5 | coscpBundlePortCount | readonly | Gauge32 |
| 1.3.6.1.4.1.9.9.202.1.3.1.6 | coscpBundleRowStatus | readwrite | RowStatus |
| 1.3.6.1.4.1.9.9.202.1.3.1.6 | coscpBundleRowStatus | readwrite | RowStatus |
Used by conformance groups
1 objects- 1.3.6.1.4.1.9.9.202.3.2.2 ciscoOscpBundleGroup