cilTargetModuleFramingType

  • 1.3.6.1.4.1.9.9.175.1.1.1.1.4
  • Access readwrite
  • Type notApplicable(1), dsx1D4(2), dsx1ESF(3)

This object identifies the framing type of the target interface. notApplicable(1) can not be set. dsx1ESF Extended SuperFrame DS1 (T1.107) dsx1D4 AT&T D4 format DS1 (T1.107) Default value is dsx1ESF(3) if cilTargetModuleInterface is a T1 interface and sonet/sdh byte-synchronous mapping is used on the cilSourceInterface. Otherwise, the default value is notApplicable(1).

This OID is also declared by other modules: CISCO-IF-LINK-CONFIG-MIB

Details

Possible values
1 notApplicable
2 dsx1D4
3 dsx1ESF

Table columns

8 objects
Oid Name Access Type
1.3.6.1.4.1.9.9.175.1.1.1.1.1 cilSourceInterface noaccess InterfaceIndex
1.3.6.1.4.1.9.9.175.1.1.1.1.1 cilSourceInterface noaccess InterfaceIndex
1.3.6.1.4.1.9.9.175.1.1.1.1.2 cilTargetModuleInterface readwrite CiscoLocationSpecifier
1.3.6.1.4.1.9.9.175.1.1.1.1.2 cilTargetModuleInterface readwrite CiscoLocationSpecifier
1.3.6.1.4.1.9.9.175.1.1.1.1.3 cilRowStatus readwrite RowStatus
1.3.6.1.4.1.9.9.175.1.1.1.1.3 cilRowStatus readwrite RowStatus
1.3.6.1.4.1.9.9.175.1.1.1.1.4 cilTargetModuleFramingType readwrite notApplicable(1), dsx1D4(2), dsx1ESF(3)
1.3.6.1.4.1.9.9.175.1.1.1.1.4 cilTargetModuleFramingType readwrite notApplicable(1), dsx1D4(2), dsx1ESF(3)

Used by conformance groups

1 objects
  • 1.3.6.1.4.1.9.9.175.3.2.2 cilConfMIBGroupRev1

Comments