cwmAutoLineDiagEnable
This object enables/disables automatic diagnostic feature of physical lines on module. In case of a line alarm, enabling this feature temporarily suspends traffic in both direction and starts local loop-back testing. Disabling this feature will not effect the traffic in one direction while another direction is in alarm.
This OID is also declared by other modules:
CISCO-WAN-MODULE-MIB
Details
Possible values
| 1 | enable |
| 2 | disable |
Table columns
14 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.4.1.9.9.145.1.1.1.1.1 | cwmIndex | noaccess | Unknown |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.1 | cwmIndex | noaccess | Unknown |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.2 | cwmIngressSCTFileId | readwrite | Unknown |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.2 | cwmIngressSCTFileId | readwrite | Unknown |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.3 | cwmIngressSCTFileName | readwrite | DisplayString |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.3 | cwmIngressSCTFileName | readwrite | DisplayString |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.4 | cwmAutoLineDiagEnable | readwrite | enable(1), disable(2) |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.4 | cwmAutoLineDiagEnable | readwrite | enable(1), disable(2) |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.5 | cwmSCTFileVerCfg | readwrite | Unknown |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.5 | cwmSCTFileVerCfg | readwrite | Unknown |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.6 | cwmSCTFileVerOpr | readonly | Unknown |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.6 | cwmSCTFileVerOpr | readonly | Unknown |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.7 | cwmUploadCounter | readonly | Unknown |
| 1.3.6.1.4.1.9.9.145.1.1.1.1.7 | cwmUploadCounter | readonly | Unknown |
Used by conformance groups
1 objects- 1.3.6.1.4.1.9.9.145.3.2.1 cwmConfigGroup