cds3LineAIScBitsCheck

  • 1.3.6.1.4.1.9.9.132.1.1.1.1.2
  • Access readwrite
  • Type check(1), ignore(2), notApplicable(3)

When check(1) is set, then Alarm Indication Signal (AIS) is declared when '1010...'b is found and C-Bits are all zero. When ignore(2) is set, an AIS condition is declared when the '1010...'b is detected irrespective of the state of the C-Bits. Does not apply to the E3 interface. The value notApplicable(3) is used in case of the interfaces where this object is not applicable. The notApplicable(3) is not allowed in write operation.

This OID is also declared by other modules: CISCO-DS3-MIB

Details

Possible values
1 check
2 ignore
3 notApplicable
Reference

RFC 2496

Table columns

20 objects
Oid Name Access Type
1.3.6.1.4.1.9.9.132.1.1.1.1.1 cds3LineType readwrite ds3cbitadm(1), ds3cbitplcp(2), e3g832adm(3), e3g751adm(4), e3g751plcp(5), ds3m23adm(6), ds3m23plcp(7), other(8), dsx3M23(9), dsx3SYNTRAN(10), dsx3CbitParity(11), dsx3ClearChannel(12), e3Framed(13), e3Plcp(14), ds3cbitfrmronly(15), ds3m23frmronly(16), e3g832frmronly(17), e3g751frmronly(18)
1.3.6.1.4.1.9.9.132.1.1.1.1.2 cds3LineAIScBitsCheck readwrite check(1), ignore(2), notApplicable(3)
1.3.6.1.4.1.9.9.132.1.1.1.1.3 cds3LineRcvFEACValidation readwrite fEACCodes4Of5(1), fEACCodes8Of10(2), disable(3)
1.3.6.1.4.1.9.9.132.1.1.1.1.4 cds3LineOOFCriteria readwrite bits3Of8(1), bits3Of16(2), notApplicable(3)
1.3.6.1.4.1.9.9.132.1.1.1.1.5 cds3TraceToTransmit readwrite Unknown
1.3.6.1.4.1.9.9.132.1.1.1.1.6 cds3TraceToExpect readwrite Unknown
1.3.6.1.4.1.9.9.132.1.1.1.1.7 cds3TraceAlarm readonly noAlarm(1), traceFailure(2)
1.3.6.1.4.1.9.9.132.1.1.1.1.8 cds3InternalEqualizer readwrite use(1), byPass(2)
1.3.6.1.4.1.9.9.132.1.1.1.1.9 cds3NearEndLineLoopbackStatus readonly Unknown
1.3.6.1.4.1.9.9.132.1.1.1.1.10 cds3FarEndLineLoopbackStatus readonly Unknown
1.3.6.1.4.1.9.9.132.1.1.1.1.1 cds3LineType readwrite ds3cbitadm(1), ds3cbitplcp(2), e3g832adm(3), e3g751adm(4), e3g751plcp(5), ds3m23adm(6), ds3m23plcp(7), other(8), dsx3M23(9), dsx3SYNTRAN(10), dsx3CbitParity(11), dsx3ClearChannel(12), e3Framed(13), e3Plcp(14), ds3cbitfrmronly(15), ds3m23frmronly(16), e3g832frmronly(17), e3g751frmronly(18)
1.3.6.1.4.1.9.9.132.1.1.1.1.2 cds3LineAIScBitsCheck readwrite check(1), ignore(2), notApplicable(3)
1.3.6.1.4.1.9.9.132.1.1.1.1.3 cds3LineRcvFEACValidation readwrite fEACCodes4Of5(1), fEACCodes8Of10(2), disable(3)
1.3.6.1.4.1.9.9.132.1.1.1.1.4 cds3LineOOFCriteria readwrite bits3Of8(1), bits3Of16(2), notApplicable(3)
1.3.6.1.4.1.9.9.132.1.1.1.1.5 cds3TraceToTransmit readwrite Unknown
1.3.6.1.4.1.9.9.132.1.1.1.1.6 cds3TraceToExpect readwrite Unknown
1.3.6.1.4.1.9.9.132.1.1.1.1.7 cds3TraceAlarm readonly noAlarm(1), traceFailure(2)
1.3.6.1.4.1.9.9.132.1.1.1.1.8 cds3InternalEqualizer readwrite use(1), byPass(2)
1.3.6.1.4.1.9.9.132.1.1.1.1.9 cds3NearEndLineLoopbackStatus readonly Unknown
1.3.6.1.4.1.9.9.132.1.1.1.1.10 cds3FarEndLineLoopbackStatus readonly Unknown

Used by conformance groups

1 objects
  • 1.3.6.1.4.1.9.9.132.8.2.1 ciscoDs3ConfMIBGroup

Comments

Parent

Advertisement