This type is not a standard SMI/SNMP base type and is not defined as a documented TEXTUAL-CONVENTION in this MIB.
It was extracted as raw syntax from the source MIB file and could not be resolved to a known type definition.
The type of call control used to establish a cross-connect.
If no value of this object is provided when a row is activated
through SNMP, then the value 'provisioned' is assigned by the
agent.
For point-to-point cross-connects, the only sets allowed on
this object are during initial row creation, and to change the
value of this object from 'protection' to 'provisioned', which
automatically changes the coifccCcKind value of the
'provisioned' cross-connect with the same coifccCcIndex value
to 'protection'. A change from 'protection' to 'provisioned'
is allowed when coifccCcRowStatus is 'active'.
The use is as follows:
provisioned(1)
Provisioned by the user or by a management system
using the Command Line Interface, SNMP, or other
means of management access to the network element.
automatic(2)
Created automatically by the network element, without
user, management, or control plane intervention. In
particular, this is used to represent fixed interface
cross-connects due to the presence of entities such as
optical add/drop multiplexers.
dynamic(3)
Created by request from a control plane (e.g. from
GMPLS signalling).
protection(4)
Created to include the second of a pair of protected
interfaces in a cross-connect, when a cross-connect
entry for the first interface in the pair is being
created. Such an entry cannot be deleted directly.
It is deleted when the cross-connect entry containing
the other interface(s) of the protected pair(s) is
deleted.