cDot11RadioDiagMode

• 1.3.6.1.4.1.9.10.105.1.1.1.1.3
• Access readwrite
• Type normal(1), apRadioDiscovery(2), siteSurveyTempSettings(3), siteSurveyNonTempSettings(4) ?

  normal(1), apRadioDiscovery(2), siteSurveyTempSettings(3), siteSurveyNonTempSettings(4)

  This type is not a standard SMI/SNMP base type and is not defined as a documented TEXTUAL-CONVENTION in this MIB.

  It was extracted as raw syntax from the source MIB file and could not be resolved to a known type definition.

• Default normal

Test mode as carried by the Cisco Radio Management Extensions in the 802.11 beacon frame. The semantics are described as follows. normal - Indicates that the station is operating in non-test mode. apRadioDiscovery - Indicates that this station is operating in AP Discovery mode. In this mode, APs transmit and measure each other's beacons. APs measure signal strength as received from other APs, levels of RF interference experienced during transmission / reception and report back the same to the NM. siteSurveyTempSettings - Indicates that the station is operating in AP assisted site survey mode with temporary channel and transmit power settings applied to the dot11 interface identified by ifIndex. siteSurveyNonTempSettings - Indicates that station is operating in AP assisted site survey mode with it's original channel and transmit power with the temporary settings not applied to the dot11 interface identified by ifIndex.