tAtmTdpShaping

  • 1.3.6.1.4.1.6527.3.1.2.16.21.1.1.6
  • Access readwrite
  • Type disabled(0), enabled(1)

tAtmTdpShaping determines whether egress shaping should occur. The default tAtmTdpShaping is determined by the Service Category. The following default applies for tAtmTdpShaping depending upon a given service category: Applicable Service Category Default Shaping Value UBR disabled CBR enabled RT-VBR enabled NRT-VBR enabled For a Service Category of UBR, tAtmTdpShaping cannot be enabled. For CBR and RT-VBR service cateories disabling shaping is MDA-dependent. Shaping is only applied in the egress direction.

Details

Possible values
0 disabled
1 enabled

Table columns

14 objects
Oid Name Access Type
1.3.6.1.4.1.6527.3.1.2.16.21.1.1.1 tAtmTdpIndex noaccess Unknown
1.3.6.1.4.1.6527.3.1.2.16.21.1.1.2 tAtmTdpSir readwrite Unknown
1.3.6.1.4.1.6527.3.1.2.16.21.1.1.3 tAtmTdpPir readwrite Unknown
1.3.6.1.4.1.6527.3.1.2.16.21.1.1.4 tAtmTdpMbs readwrite Unknown
1.3.6.1.4.1.6527.3.1.2.16.21.1.1.5 tAtmTdpMir readwrite Unknown
1.3.6.1.4.1.6527.3.1.2.16.21.1.1.6 tAtmTdpShaping readwrite disabled(0), enabled(1)
1.3.6.1.4.1.6527.3.1.2.16.21.1.1.7 tAtmTdpServCat readwrite AtmServiceCategory
1.3.6.1.4.1.6527.3.1.2.16.21.1.1.8 tAtmTdpDescription readwrite TItemDescription
1.3.6.1.4.1.6527.3.1.2.16.21.1.1.9 tAtmTdpLastChanged readonly TimeStamp
1.3.6.1.4.1.6527.3.1.2.16.21.1.1.10 tAtmTdpRowStatus readwrite RowStatus
1.3.6.1.4.1.6527.3.1.2.16.21.1.1.11 tAtmTdpDescrType readwrite TAtmTdpDescrType
1.3.6.1.4.1.6527.3.1.2.16.21.1.1.12 tAtmTdpCdvt readwrite Unknown
1.3.6.1.4.1.6527.3.1.2.16.21.1.1.13 tAtmTdpPolicing readwrite disabled(0), enabled(1)
1.3.6.1.4.1.6527.3.1.2.16.21.1.1.14 tAtmTdpCLPTagging readwrite disabled(0), enabled(1)

Used by conformance groups

2 objects
  • 1.3.6.1.4.1.6527.3.1.1.16.2.15 tmnxQosAtmTdpV3v0Group
  • 1.3.6.1.4.1.6527.3.1.1.16.2.24 tmnxQosAtmTdpV5v0Group

Comments

Parent

Advertisement