juniFt1IfDataPolarity

obsolete

1.3.6.1.4.1.4874.2.2.6.1.2.1.6
Access readwrite
Type normal(0), inverted(1)

normal(0), inverted(1)

This type is not a standard SMI/SNMP base type and is not defined as a documented TEXTUAL-CONVENTION in this MIB.

It was extracted as raw syntax from the source MIB file and could not be resolved to a known type definition.
Default normal

Obsolete. Polarity of data transmitted on this FT1 interface. Inverted data is used for certain line coding configurations to ensure sufficient one's density for timing recovery by the remote end.

This OID is also declared by other modules: Unisphere-Data-FRACTIONAL-T1-MIB

Possible values

0	normal
1	inverted

Oid	Name	Access	Type
1.3.6.1.4.1.4874.2.2.6.1.2.1.1	juniFt1IfIndex	noaccess	InterfaceIndex InterfaceIndex This type is not a standard SMI/SNMP base type and is not defined as a documented TEXTUAL-CONVENTION in this MIB. It was extracted as raw syntax from the source MIB file and could not be resolved to a known type definition.
1.3.6.1.4.1.4874.2.2.6.1.2.1.2	juniFt1IfRowStatus	readwrite	RowStatus
1.3.6.1.4.1.4874.2.2.6.1.2.1.3	juniFt1IfLowerIfIndex	readwrite	InterfaceIndexOrZero InterfaceIndexOrZero This type is not a standard SMI/SNMP base type and is not defined as a documented TEXTUAL-CONVENTION in this MIB. It was extracted as raw syntax from the source MIB file and could not be resolved to a known type definition.
1.3.6.1.4.1.4874.2.2.6.1.2.1.4	juniFt1IfTimeSlotMap	readwrite	JuniTimeSlotMap JuniTimeSlotMap This type is not a standard SMI/SNMP base type and is not defined as a documented TEXTUAL-CONVENTION in this MIB. It was extracted as raw syntax from the source MIB file and could not be resolved to a known type definition.
1.3.6.1.4.1.4874.2.2.6.1.2.1.5	juniFt1IfTimeSlotRate	readwrite	nx56kbps(0), nx64kbps(1) nx56kbps(0), nx64kbps(1) This type is not a standard SMI/SNMP base type and is not defined as a documented TEXTUAL-CONVENTION in this MIB. It was extracted as raw syntax from the source MIB file and could not be resolved to a known type definition.
1.3.6.1.4.1.4874.2.2.6.1.2.1.6	juniFt1IfDataPolarity	readwrite	normal(0), inverted(1) normal(0), inverted(1) This type is not a standard SMI/SNMP base type and is not defined as a documented TEXTUAL-CONVENTION in this MIB. It was extracted as raw syntax from the source MIB file and could not be resolved to a known type definition.
1.3.6.1.4.1.4874.2.2.6.1.2.1.7	juniFt1IfLoopbackConfig	readwrite	noLoop(0), loop(1) noLoop(0), loop(1) This type is not a standard SMI/SNMP base type and is not defined as a documented TEXTUAL-CONVENTION in this MIB. It was extracted as raw syntax from the source MIB file and could not be resolved to a known type definition.

1.3.6.1.4.1.4874.2.2.6.4.2.1 juniFt1Group

juniFt1IfDataPolarity

Details

Table columns

Used by conformance groups

Comments

Parent