chmgrODescrCapabilities
Connection capabilities that indicate which parameters that are possible to configure in this connection description. allowCapacityInterval(0) Allows the configuration of capacity to have different values on requested and accepted capacity. destination(1) Describes if destinations shall be configured for this description. This is the normal case for most connections, but is some cases, the destination is decided by the application that is responsible for the service on the connection. allowDynamicCapacity(2) Allows the use of dynamic capacity adjustment. isMulticast(3) Describes if the connection is a multicast connection. This value is set by the application that is responsible for the service that uses the connection. allowEstablish(4) Allows the configuration of whether the connection shall be established using the capacity configurations of the connection or not. allowProtection(5) Allows the connection to be configured to be 1+1 protected by using two channels for the connection. allowReestablish(6) Allows configuration of the re- establishment algorithm. allowScheduling(7) Allows an external application, such as a scheduled, to alter the capacity and administrative state of the connection. allowSourceRoute(8) Allows configuration of source routed connections. requireCapacity(9) Requires the configuration of capacity. This is the normal case for most connections, but in some cases, the capacity is defaulted by the application. allowAlternative(10) Allows configuration of several alternative destinations. The unicast connection will be established using only one of the available destination. allowZeroCapacity(11). Allows configuration of zero capacity.
Table columns
20 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.1 | chmgrODescrIndex | noaccess | Unsigned32 |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.2 | chmgrODescrType | readonly | ets(1), its(2), dle(3) |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.3 | chmgrODescrCapabilities | readonly | Unknown |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.4 | chmgrODescrCustomerId | readonly | Unsigned32 |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.5 | chmgrODescrServiceReference | readonly | RowPointer |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.6 | chmgrODescrAcceptableBps | readwrite | Gauge32 |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.7 | chmgrODescrAcceptableSlots | readonly | Gauge32 |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.8 | chmgrODescrRequestedBps | readwrite | Gauge32 |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.9 | chmgrODescrRequestedSlots | readonly | Gauge32 |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.10 | chmgrODescrReestablishMethod | readwrite | exponential(1) |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.11 | chmgrODescrMinInterval | readwrite | Unknown |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.12 | chmgrODescrMaxInterval | readwrite | Unknown |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.13 | chmgrODescrEstablish | readwrite | TruthValue |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.14 | chmgrODescrNextDestTableIndex | readonly | Unknown |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.15 | chmgrODescrPrecedence | readwrite | TruthValue |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.16 | chmgrODescrSuppressAlarms | readwrite | Unknown |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.17 | chmgrODescrAcceptableMbps | readwrite | Gauge32 |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.18 | chmgrODescrRequestedMbps | readwrite | Gauge32 |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.19 | chmgrODescrRequestedDcpVersion | readwrite | DcpVersion |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.20 | chmgrODescrOneHopSpareCapUtilization | readwrite | TruthValue |