jnxVpnIfProtocol
Protocol running over this VPN interface. The values up to 10 are taken from draft-martini-l2circuit-trans-mpls-08.txt; the value for vpls is taken from draft-lasserre-vkompella-ppvpn-vpls-01.txt. The values from 20-23 are used when the VPN is a Layer 3 VPN.
Details
Possible values
| 0 | other |
| 1 | frameRelay |
| 2 | atmAal5 |
| 3 | atmCell |
| 4 | ethernetVlan |
| 5 | ethernet |
| 6 | ciscoHdlc |
| 7 | ppp |
| 8 | cem |
| 9 | atmVcc |
| 10 | atmVpc |
| 11 | vpls |
| 12 | ipInterworking |
| 13 | snapInterworking |
| 15 | frameRelayPort |
| 17 | satope1 |
| 18 | satopt1 |
| 20 | static |
| 21 | rip |
| 22 | ospf |
| 23 | bgp |
| 24 | satope3 |
| 25 | satopt3 |
| 26 | cesop |
| 129 | atmTrunkNNI |
| 130 | atmTrunkUNI |
Table columns
10 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.4.1.2636.3.26.1.3.1.1 | jnxVpnIfVpnType | notifyonly | JnxVpnType |
| 1.3.6.1.4.1.2636.3.26.1.3.1.2 | jnxVpnIfVpnName | notifyonly | JnxVpnName |
| 1.3.6.1.4.1.2636.3.26.1.3.1.3 | jnxVpnIfIndex | notifyonly | Unsigned32 |
| 1.3.6.1.4.1.2636.3.26.1.3.1.4 | jnxVpnIfRowStatus | readonly | RowStatus |
| 1.3.6.1.4.1.2636.3.26.1.3.1.5 | jnxVpnIfStorageType | readonly | StorageType |
| 1.3.6.1.4.1.2636.3.26.1.3.1.6 | jnxVpnIfAssociatedPw | readonly | Unsigned32 |
| 1.3.6.1.4.1.2636.3.26.1.3.1.7 | jnxVpnIfProtocol | readonly | other(0), frameRelay(1), atmAal5(2), atmCell(3), ethernetVlan(4), ethernet(5), ciscoHdlc(6), ppp(7), cem(8), atmVcc(9), atmVpc(10), vpls(11), ipInterworking(12), snapInterworking(13), frameRelayPort(15), satope1(17), satopt1(18), static(20), rip(21), ospf(22), bgp(23), satope3(24), satopt3(25), cesop(26), atmTrunkNNI(129), atmTrunkUNI(130) |
| 1.3.6.1.4.1.2636.3.26.1.3.1.8 | jnxVpnIfInBandwidth | readonly | Unsigned32 |
| 1.3.6.1.4.1.2636.3.26.1.3.1.9 | jnxVpnIfOutBandwidth | readonly | Unsigned32 |
| 1.3.6.1.4.1.2636.3.26.1.3.1.10 | jnxVpnIfStatus | readonly | unknown(0), noLocalInterface(1), disabled(2), encapsulationMismatch(3), down(4), up(5) |