ipv6RoutePolicy

obsolete
  • 1.3.6.1.2.1.55.1.11.1.8
  • Access readonly
  • Type Integer32

The general set of conditions that would cause the selection of one multipath route (set of next hops for a given destination) is referred to as 'policy'. Unless the mechanism indicated by ipv6RouteProtocol specified otherwise, the policy specifier is the 8-bit Traffic Class field of the IPv6 packet header that is zero extended at the left to a 32-bit value. Protocols defining 'policy' otherwise must either define a set of values which are valid for this object or must implement an integer- instanced policy table for which this object's value acts as an index. This object is obsoleted by IP-FORWARD-MIB::inetCidrRoutePolicy.

Table columns

14 objects
Oid Name Access Type
1.3.6.1.2.1.55.1.11.1.1 ipv6RouteDest noaccess Ipv6Address
1.3.6.1.2.1.55.1.11.1.2 ipv6RoutePfxLength noaccess Unknown
1.3.6.1.2.1.55.1.11.1.3 ipv6RouteIndex noaccess Unsigned32
1.3.6.1.2.1.55.1.11.1.4 ipv6RouteIfIndex readonly Ipv6IfIndexOrZero
1.3.6.1.2.1.55.1.11.1.5 ipv6RouteNextHop readonly Ipv6Address
1.3.6.1.2.1.55.1.11.1.6 ipv6RouteType readonly other(1), discard(2), local(3), remote(4)
1.3.6.1.2.1.55.1.11.1.7 ipv6RouteProtocol readonly other(1), local(2), netmgmt(3), ndisc(4), rip(5), ospf(6), bgp(7), idrp(8), igrp(9)
1.3.6.1.2.1.55.1.11.1.8 ipv6RoutePolicy readonly Integer32
1.3.6.1.2.1.55.1.11.1.9 ipv6RouteAge readonly Unsigned32
1.3.6.1.2.1.55.1.11.1.10 ipv6RouteNextHopRDI readonly Unsigned32
1.3.6.1.2.1.55.1.11.1.11 ipv6RouteMetric readonly Unsigned32
1.3.6.1.2.1.55.1.11.1.12 ipv6RouteWeight readonly Unsigned32
1.3.6.1.2.1.55.1.11.1.13 ipv6RouteInfo readonly RowPointer
1.3.6.1.2.1.55.1.11.1.14 ipv6RouteValid readwrite TruthValue

Used by conformance groups

1 objects
  • 1.3.6.1.2.1.55.3.2.1 ipv6GeneralGroup

Comments