dot3OutPauseFrames
A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCOutPauseFrames object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
Details
[IEEE 802.3 Std.], 30.3.4.2, aPAUSEMACCtrlFramesTransmitted.
Table columns
6 objects| Oid | Name | Access | Type |
|---|---|---|---|
| 1.3.6.1.2.1.10.7.10.1.1 | dot3PauseAdminMode | readwrite | disabled(1), enabledXmit(2), enabledRcv(3), enabledXmitAndRcv(4) |
| 1.3.6.1.2.1.10.7.10.1.2 | dot3PauseOperMode | readonly | disabled(1), enabledXmit(2), enabledRcv(3), enabledXmitAndRcv(4) |
| 1.3.6.1.2.1.10.7.10.1.3 | dot3InPauseFrames | readonly | Counter32 |
| 1.3.6.1.2.1.10.7.10.1.4 | dot3OutPauseFrames | readonly | Counter32 |
| 1.3.6.1.2.1.10.7.10.1.5 | dot3HCInPauseFrames | readonly | Counter64 |
| 1.3.6.1.2.1.10.7.10.1.6 | dot3HCOutPauseFrames | readonly | Counter64 |
Used by conformance groups
1 objects- 1.3.6.1.2.1.35.2.1.9 etherControlPauseGroup