frErrType

  • 1.3.6.1.2.1.10.32.3.1.2
  • Access readonly
  • Type unknownError(1), receiveShort(2), receiveLong(3), illegalAddress(4), unknownAddress(5), dlcmiProtoErr(6), dlcmiUnknownIE(7), dlcmiSequenceErr(8), dlcmiUnknownRpt(9), noErrorSinceReset(10)

The type of error that was last seen on this interface: receiveShort: frame was not long enough to allow demultiplexing - the address field was incomplete, or for virtual circuits using Multiprotocol over Frame Relay, the protocol identifier was missing or incomplete. receiveLong: frame exceeded maximum length configured for this interface. illegalAddress: address field did not match configured format. unknownAddress: frame received on a virtual circuit which was not active or administratively disabled. dlcmiProtoErr: unspecified error occurred when attempting to interpret link maintenance frame. dlcmiUnknownIE: link maintenance frame contained an Information Element type which is not valid for the configured link maintenance protocol. dlcmiSequenceErr: link maintenance frame contained a sequence number other than the expected value. dlcmiUnknownRpt: link maintenance frame contained a Report Type Information Element whose value was not valid for the configured link maintenance protocol. noErrorSinceReset: no errors have been detected since the last cold start or warm start.

Details

Possible values
1 unknownError
2 receiveShort
3 receiveLong
4 illegalAddress
5 unknownAddress
6 dlcmiProtoErr
7 dlcmiUnknownIE
8 dlcmiSequenceErr
9 dlcmiUnknownRpt
10 noErrorSinceReset

Table columns

6 objects
Oid Name Access Type
1.3.6.1.2.1.10.32.3.1.1 frErrIfIndex readonly InterfaceIndex
1.3.6.1.2.1.10.32.3.1.2 frErrType readonly unknownError(1), receiveShort(2), receiveLong(3), illegalAddress(4), unknownAddress(5), dlcmiProtoErr(6), dlcmiUnknownIE(7), dlcmiSequenceErr(8), dlcmiUnknownRpt(9), noErrorSinceReset(10)
1.3.6.1.2.1.10.32.3.1.3 frErrData readonly Unknown
1.3.6.1.2.1.10.32.3.1.4 frErrTime readonly TimeStamp
1.3.6.1.2.1.10.32.3.1.5 frErrFaults readonly Counter32
1.3.6.1.2.1.10.32.3.1.6 frErrFaultTime readonly TimeStamp

Used by conformance groups

2 objects
  • 1.3.6.1.2.1.10.32.6.1.4 frErrGroup
  • 1.3.6.1.2.1.10.32.6.1.8 frErrGroup0

Comments