Temporary transmit power level for the 802.11
clients associated with this station through the
802.11 interface identified by ifIndex.
The value configured through this object is carried
by the beacon frames transmitted by this 802.11
station and picked up by the associated clients, if
any, from these beacon frames to set their respective
transmit power levels.
A value in the range of 1 to 8 refers to one of the
recommended power levels from the table
cd11IfClientTxPowerTable defined in
CISCO-DOT11-IF-MIB. The power levels that can be
assigned to this object from the set of acceptable
values mentioned above vary depending on the value of
the MIB object cd11IfCurrentCarrierSet defined in
CISCO-DOT11-IF-MIB.
The object cDot11RadioDiagSettingsEnabled must be set
to 'true' to apply the temporary value specified
through this object to the respective clients.
Setting cDot11RadioDiagSettingsEnabled to 'false'
restores the transmit power setting of the associated
clients to the original value that was there before
applying this temporary value to those clients. A
value of 0 indicates that this object hasn't been
configured with a valid power level.