tmnxL2tpApNasPortBitspec
1.3.6.1.4.1.6527.3.1.2.60.1.100.1.1.19
The value of tmnxL2tpApNasPortBitspec specifies
what number will be put in the RADIUS NAS-Port
attribute if included in RADIUS accounting-request messages.
This field is only applicable if the 'nasPort' bit is set in
tmnxL2tpApIncludeAttributes.
<origin> ::= 'o' | 'i' | 's' | 'm' | 'p' | 'v' | 'c'
'c' - ATM VCI (Virtual Channel Identifier)
'i' - inner VLAN ID
'm' - MDA number
'o' - outer VLAN ID
'p' - port number
's' - slot number
'v' - ATM VPI (Virtual Path Identifier)
Maximum 32 bits can be specified.
If less than 32 bits are specified, the least significant bits are
used and the omitted higher bits are set to zero.
Example: *12o*12i*2s01 means 'the 12 least significant bits of the
outer VLAN ID, followed by the 12 least significant bits of the inner
VLAN ID, followed by the two least significant bits of the slot number,
followed by a zero and a one-bit', stored in network order in the least
significant bits: 0000ooooooooooooiiiiiiiiiiiiss01.