tmnxOamPingCtlFcName 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.10

The value of tmnxOamPingCtlFcName specifies the forwarding class to be used when launching the probe(s). The forwarding class name must be present in the index column of TIMETRA-QOS-MIB::tFCNameTable. This object is optional. As shown in the following table a) this object is applicable to a subset of the test types, and b) the default forwarding class depends on the test type. tmnxOamPingCtlTestMode Applicable? Default ---------------------- ----------- ------- 'cpePing' yes 'be' 'ethCfmLoopback' yes 'nc' 'ethCfmTwoWayDelay' yes 'nc' ethCfmTwoWaySlm' yes 'nc' 'icmpPing' yes 'nc' 'lspPing' yes 'be' 'macPing' yes 'be' 'p2mpLspPing' yes 'be' 'sdpPing' yes 'be' 'vccvPing' yes 'be' 'vprnPing' yes 'be' otherwise no N/A For 'ethCfmLoopback','ethCfmTwoWayDelay', and 'ethCfmTwoWaySlm', the forwarding class depends on whether the request is configured to egress on a network port or an access port. In the network port case, the forwarding class is the forwarding class of the pseudowire. In the access port case, the forwarding class is that of the SAP's egress encapsulation policy. For 'lspPing' this is the forwarding class of the LSP tunnel. For 'macPing' or 'sdpPing' this is the forwarding class of the SDP encapsulation. For 'p2mpLspPing' this is the forwarding class of the P2MP LSP tree. For 'vccvPing' this is the forwarding class of the pseudowire. If forwarding classes are mapped by the applicable QoS policy, the probe(s) may be launched using a different forwarding class than the forwarding class specified by this object.