h3cQoSCharacteristicsValue
1.3.6.1.4.1.43.45.1.10.7.1.1.1.1.1.5
The characteristics value of modules of QoS.
The type of value of characteristics.
car module:
Index Characteristic Value
1 car function 1, if supported.
2 match any 1, if supported.
3 match acl If last 8 bits of this object are set to 1,
it indicates that the match acl type is supported,
bit 0 stands for IPv6 basic acl,
bit 1 stands for IPv6 advanced acl,
bit 2 stands for mac acl,
bit 3 stands for user acl,
bit 4 stands for IPv6 user acl,
bit 5 stands for IPv6 simple acl,
bit 6 stands for IPv4 basic acl,
bit 7 stands for IPv4 advanced acl.
4 match carl 1, if supported.
5 green action If last 10 bits of this object are set to 1,
it indicates that the green action type is supported,
bit 0 stands for continue,
bit 1 stands for drop,
bit 2 stands for transmit,
bit 3 stands for setting prec,
bit 4 stands for setting dscp,
bit 5 stands for setting exp,
bit 6 stands for setting atm clp,
bit 7 stands for setting fr de,
bit 8 stands for setting 802.1p,
bit 9 stands for setting local precedence.
6 yellow action If last 10 bits of this object are set to 1,
it indicates that the yellow action type is supported,
and the mask is same to green action.
7 red action If last 10 bits of this object are set to 1,
it indicates that the red action type is supported,
and the mask is same to green action.
8 input 1, if supported.
9 output 1, if supported.
10 cir 1, if supported.
11 burst size 1, if supported.
12 excess burst size
1, if supported.
13 pir 1, if supported.
14 default cir The default value of cir(integer).
15 lower limit of cir
The lower limit value of cir(integer).
16 upper limit of cir
The upper limit value of cir(integer).
17 cir granularity
The value of cir granularity(integer).
18 default pir The default value of pir(integer).
19 lower limit of pir
The lower limit value of cir(integer).
20 upper limit of pir
The upper limit value of pir(integer).
21 pir granularity
The value of pir granularity(integer).
22 default burst size
The default value of burst size(integer).
23 lower limit of burst size
The lower limit value of burst size(integer).
24 upper limit of burst size
The upper limit value of burst size(integer).
25 car burst granularity size
The value of burst granularity size(integer).
26 default excess burst size
The default value of car excess burst size(integer).
27 lower limit of excess burst size
The lower limit value of excess burst size(integer).
28 upper limit of excess burst size
The upper limit value of excess burst size(integer).
29 excess burst granularity size
The value of excess burst granularity size(integer).
30 car aggregation function
1, if supported.
31 max aggregation
The max value of aggregation(integer).
32 flow number The value of flow number(integer).
gts module
Index Characteristic Value
1 gts function 1, if supported.
2 match any 1, if supported.
3 match acl If last 8 bits of this object are set to 1,
it indicates that the match acl type is supported,
bit 0 stands for IPv6 basic acl,
bit 1 stands for IPv6 advanced acl,
bit 2 stands for mac acl,
bit 3 stands for user acl,
bit 4 stands for IPv6 user acl,
bit 5 stands for IPv6 simple acl,
bit 6 stands for IPv4 basic acl,
bit 7 stands for IPv4 advanced acl.
4 match queue 1, if supported.
5 cir 1, if supported.
6 burst size 1, if supported.
7 excess burst size
1, if supported.
8 queue length 1, if supported.
9 default cir The default value of cir(integer).
10 lower limit of cir
The lower limit value of cir(integer).
11 upper limit of cir
The upper limit value of cir(integer).
12 cir granularity
The value of cir granularity(integer).
13 default burst size
The default value of burst size(integer).
14 lower limit of burst size
The lower limit value of burst size(integer).
15 upper limit of burst size
The upper limit value of burst size(integer).
16 burst size granularity
The value of burst size granularity(integer).
17 default excess burst size
The default value of excess burst size(integer).
18 lower limit of excess burst size
The lower limit value of excess burst size(integer).
19 upper limit of excess burst size
The upper limit value of excess burst size(integer).
20 excess burst size granularity
The value of excess burst size granularity(integer).
21 default queue length
The default length of queue(integer).
22 lower limit of queue length
The lower limit length of queue(integer).
23 upper limit of queue length
The upper limit length of queue(integer).
24 queue number The number of queue(integer).
25 flow number The value of flow number(integer).
26 pir 1, if supported.
27 lower limit of pir
The lower limit value of pir(integer).
28 upper limit of pir
The upper limit value of pir(integer).
29 pir granularity
The value of pir granularity(integer).
lr module
Index Characteristic Value
1 lr function 1, if supported.
2 input 1, if supported.
3 output 1, if supported.
4 cir 1, if supported.
5 burst size 1, if supported.
6 excess burst size
1, if supported.
7 default cir The default value of cir(integer).
8 lower limit of cir
The lower limit value of cir(integer).
9 upper limit of cir
The upper limit value of cir(integer).
10 cir granularity
The value of cir granularity(integer).
11 default burst size
The default value of burst size(integer).
12 lower limit of burst size
The lower limit value of burst size(integer).
13 upper limit of burst size
The upper limit value of burst size(integer).
14 burst size granularity
The value of burst size granularity(integer).
15 default excess burst size
The default value of excess burst size(integer).
16 lower limit of excess burst size
The lower limit value of excess burst size(integer).
17 upper limit of excess burst size
The upper limit value of excess burst size(integer).
18 excess burst size granularity
The value of excess burst size granularity(integer).
hardware queue management module
Index Characteristic Value
1 hardware queue management function
1, if supported.
2 mode If last 7 bits of this object are set to 1,
it indicates that the MODE type is supported,
bit 0 stands for sp mode,
bit 1 stands for wrr mode,
bit 2 stands for hard wfq mode,
bit 3 stands for sp pattern,
bit 4 stands for max delay of wrr,
bit 5 stands for wrr group,
bit 6 stands for bandwidth mode.
3 default mode The default mode(integer).
4 max queue number
The max number of queue(integer).
5 wrr group number
The number of wrr group(integer).
6 wrr unit If last 2 bits of this object are set to 1,
it indicates that the wrr unit type is supported,
bit 0 stands for weight,
bit 1 stands for byte count.
7 wfq unit If last 3 bits of this object are set to 1,
it indicates that the wfq unit type is supported,
bit 0 stands for bandwidth,
bit 1 stands for percent,
bit 2 stands for weight.
8 default wrr schedule value
The default value of wrr schedule(integer).
9 lower limit of wrr schedule value
The lower limit value of wrr schedule(integer).
10 upper limit of wrr schedule value
The upper limit value of wrr schedule.
11 default value of wfq schedule
The default value of wfq schedule(integer).
12 lower limit of wfq schedule value
The lower limit value of wfq schedule(integer).
13 upper limit of wfq schedule value
The upper limit value of wfq schedule.
14 default max delay
The default value of max delay(integer).
15 lower limit of max delay
The lower limit value of max delay(integer).
16 upper limit of max delay
The upper limit value of max delay(integer).
17 wrr sp group 1, if supported.
18 wrr sp weight 1, if supported.
19 default wrr sp weight
The default value of wrr sp weight(integer).
20 default wrr group
The default group of wrr(integer).
21 default bandwidth value
The default value of bandwidth(integer).
22 lower limit of bandwidth value
The lower limit value of bandwidth(integer).
23 upper limit of bandwidth value
The upper limit value of bandwidth(integer).
wred module
Index Characteristic Value
1 wred function 1, if supported.
2 port based 1, if supported.
3 table based The value of table based(integer).
4 IP precedence 1, if supported.
5 dscp 1, if supported.
6 exp 1, if supported.
7 atm clp 1, if supported.
8 802.1p 1, if supported.
9 fr de 1, if supported.
10 queue 1, if supported.
11 drop precedence
1, if supported.
12 color level If last 3 bits of this object are set to 1,
it indicates that the color type is supported,
bit 0 stands for green,
bit 1 stands for yellow,
bit 2 stands for red.
13 min threshold 1, if supported.
14 max threshold 1, if supported.
15 exponent 1, if supported.
16 discard probability denominator
1, if supported.
17 lower limit of min threshold
The lower limit value of min threshold(integer).
18 upper limit of min threshold
The upper limit value of min threshold(integer).
19 default min threshold
The default value of min threshold(integer).
20 lower limit of max threshold
The lower limit value of max threshold(integer).
21 lower limit of max threshold
The upper limit value of max threshold(integer).
22 default max threshold
The default value of max threshold (integer).
23 lower limit of exponent
The lower limit value of exponent(integer).
24 upper limit of exponent
The upper limit value of exponent(integer).
25 default exponent
The default value of exponent(integer).
26 lower limit of discard probability denominator
The lower limit value of mark prob(integer).
27 upper limit of discard probability denominator
The upper limit value of mark prob(integer).
28 default discard probability denominator
The value of default mark prob(integer).
29 port based parameter
If last 2 bits of this object are set to 1,
it indicates that the color type is supported,
bit 0 stands for port based IP,
bit 1 stands for port based dscp.
priority mapping table module
Index Characteristic Value
1 priority map table function
1, if supported.
2 802.1p map to lp
If last 3 bits of this object are set to 1,
it indicates that the direction type is supported,
bit 0 stands for no direction,
bit 1 stands for inbound,
bit 2 stands for outbound.
3 802.1p map to dp
Same to 802.1p map to lp.
4 802.1p map to dscp
Same to 802.1p map to lp.
5 dscp map to lp
Same to 802.1p map to lp.
6 dscp map to dp
Same to 802.1p map to lp.
7 dscp map to 802.1p
Same to 802.1p map to lp.
8 dscp map to dscp
Same to 802.1p map to lp.
9 exp map to lp
Same to 802.1p map to lp.
10 exp map to dp
Same to 802.1p map to lp.
11 lp map to 802.1p
Same to 802.1p map to lp.
12 802.1p map to rpr
Same to 802.1p map to lp.
13 dscp map to rpr
Same to 802.1p map to lp.
14 exp map to rpr
Same to 802.1p map to lp.
15 IP precedence map to rpr
Same to 802.1p map to lp.
16 lp map to dscp
Same to 802.1p map to lp.
17 802.11e map to lp
Same to 802.1p map to lp.
18 lp map to 802.11e
Same to 802.1p map to lp.
19 up map to 802.1p
Same to 802.1p map to lp.
20 up map to dscp Same to 802.1p map to lp.
21 up map to exp Same to 802.1p map to lp.
22 up map to dp Same to 802.1p map to lp.
23 up map to lp Same to 802.1p map to lp.
24 up map to rpr Same to 802.1p map to lp.
25 up map to fc Same to 802.1p map to lp.
26 lp map to lp Same to 802.1p map to lp.
27 802.1p map to exp
Same to 802.1p map to lp.
28 dscp map to exp
Same to 802.1p map to lp.
29 exp map to 802.1p
Same to 802.1p map to lp.
30 exp map to dscp
Same to 802.1p map to lp.
31 exp map to exp Same to 802.1p map to lp.
32 lp map to exp Same to 802.1p map to lp.
33 lp map to dp Same to 802.1p map to lp.
34 up map to up Same to 802.1p map to lp.
colored priority mapping table module
Index Characteristic Value
1 colored priority mapping table function
If bit 0 - bit 2 of this object are set to 1,
it indicates that the direction type is supported,
bit 0 stands for no direction,
bit 1 stands for inbound,
bit 2 stands for outbound.
If bit 3 - bit 5 of this object are set to 1,
it indicates that the color type is supported,
bit 3 stands for green,
bit 4 stands for yellow,
bit 5 stands for red.
2 802.1p map to lp
Same to colored priority mapping table function.
3 802.1p map to dp
Same to colored priority mapping table function.
4 802.1p map to dscp
Same to colored priority mapping table function.
5 dscp map to lp Same to colored priority mapping table function.
6 dscp map to dp Same to colored priority mapping table function.
7 dscp map to 802.1p
Same to colored priority mapping table function.
8 dscp map to dscp
Same to colored priority mapping table function.
9 exp map to lp Same to colored priority mapping table function.
10 exp map to dp Same to colored priority mapping table function.
11 lp map to 802.1p
Same to colored priority mapping table function.
12 802.1p map to rpr
Same to colored priority mapping table function.
13 dscp map to rpr
Same to colored priority mapping table function.
14 exp map to rpr Same to colored priority mapping table function.
15 IP precedence map to rpr
Same to colored priority mapping table function.
16 lp map to dscp Same to colored priority mapping table function.
17 802.11e map to lp
Same to colored priority mapping table function.
18 lp map to 802.11e
Same to colored priority mapping table function.
19 up map to 802.1p
Same to colored priority mapping table function.
20 up map to dscp Same to colored priority mapping table function.
21 up map to exp Same to colored priority mapping table function.
22 up map to dp Same to colored priority mapping table function.
23 up map to lp Same to colored priority mapping table function.
24 up map to rpr Same to colored priority mapping table function.
25 up map to fc Same to colored priority mapping table function.
26 lp map to lp Same to colored priority mapping table function.
27 802.1p map to exp
Same to colored priority mapping table function.
28 dscp map to exp
Same to colored priority mapping table function.
29 exp map to 802.1p
Same to colored priority mapping table function.
30 exp map to dscp
Same to colored priority mapping table function.
31 exp map to exp Same to colored priority mapping table function.
32 lp map to exp Same to colored priority mapping table function.
33 lp map to dp Same to colored priority mapping table function.
34 up map to up Same to colored priority mapping table function.
port priority Module
Index Characteristic Value
1 port priority function
1, if supported.
2 priority trust
If last 2 bits of this object are set to 1,
it indicates that the priority trust type is supported,
bit 0 stands for global,
bit 1 stands for interface.
3 802.1p 1, if supported.
4 dscp 1, if supported.
5 exp 1, if supported.
6 IP precedence
1, if supported.
7 802.11e 1, if supported.
8 override 1, if supported.
9 auto 1, if supported.
qos policy module
Index Characteristic Value
1 qos policy function
If last 4 bits of this object are set to 1,
it indicates that the policy type is supported,
bit 0 stands for inbound,
bit 1 stands for outbound,
bit 2 stands for global inbound,
bit 3 stands for global outbound.
2 match not 1, if supported.
3 and If last 19 bits of this object are set to 1,
it indicates that the if match and type is supported,
bit 0 stands for acl, bit 1 stands for class,
bit 2 stands for dscp,
bit 3 stands for inbound interface,
bit 4 stands for IP precedence,
bit 5 stands for rtp port,
bit 6 stands for mpls exp,
bit 7 stands for 802.1p,
bit 8 stands for mac,
bit 9 stands for protocol,
bit 10 stands for service vlan ID,
bit 11 stands for pr de,
bit 12 stands for atm clp,
bit 13 stands for source IP,
bit 14 stands for any,
bit 15 stands for local ID,
bit 16 stands for topmost vlan,
bit 17 stands for local precedence,
bit 18 stands for drop priority.
4 or If last 19 bits of this object are set to 1,
it indicates that the if match or type is supported,
bit 0 stands for acl, bit 1 stands for class,
bit 2 stands for dscp,
bit 3 stands for inbound interface,
bit 4 stands for IP precedence,
bit 5 stands for rtp port,
bit 6 stands for mpls exp,
bit 7 stands for 802.1p,
bit 8 stands for mac,
bit 9 stands for protocol,
bit 10 stands for service vlan ID,
bit 11 stands for pr de,
bit 12 stands for atm clp,
bit 13 stands for source IP,
bit 14 stands for any,
bit 15 stands for local ID,
bit 16 stands for topmost vlan,
bit 17 stands for local precedence,
bit 18 stands for drop priority.
5 match acl If last 8 bits of this object are set to 1,
it indicates that the acl type is supported,
bit 0 stands for IPv6 basic acl,
bit 1 stands for IPv6 advanced acl,
bit 2 stands for mac acl,
bit 3 stands for user acl,
bit 4 stands for IPv6 user acl,
bit 5 stands for IPv6 simple acl,
bit 6 stands for IPv4 basic acl,
bit 7 stands for IPv4 advanced acl.
6 match sub class
1, if supported.
7 match dscp
1, if supported.
8 match inbound interface
1, if supported.
9 match ip precedence
1, if supported.
10 match rtp port
1, if supported.
11 match mpls exp
1, if supported.
12 match 802.1p
1, if supported.
13 match mac
1, if supported.
14 match protocol If last 3 bits of this object are set to 1,
it indicates that the protocol type is supported,
bit 0 stands for IPv4 protocol,
bit 1 stands for IPv6 protocol,
bit 2 stands for bittorrent protocol.
15 match customer vlan ID
If last 2 bits of this object are set to 1,
it indicates that the match type is supported,
bit 0 stands for service vlan ID list,
bit 1 stands for service vlan ID range.
16 match fr de
1, if supported.
17 match atm clp
1, if supported.
18 match source ip-address
1, if supported.
19 match any
1, if supported.
20 match qos local ID
1, if supported.
21 traffic police action
1, if supported.
22 traffic shape action
1, if supported.
23 set ip dscp action
1, if supported.
24 set ip precedence action
1, if supported.
25 set mpls exp action
1, if supported.
26 class based wfq action
1, if supported.
27 nest sub traffic policy
1, if supported.
28 set fr de action
1, if supported.
29 set 802.1p action
1, if supported.
30 set atm clp action
1, if supported.
31 account action
1, if supported.
32 filter action
1, if supported.
33 set drop priority action
1, if supported.
34 set vlan ID action
1, if supported.
35 traffic redirect to IP next hop
1, if supported.
36 traffic redirect to interface
If last 11 bits of this object are set to 1,
it indicates that the redirecting interface type
is supported,
bit 0 stands for l2ethernet,
bit 1 stands for l2ge,
bit 2 stands for l2xge,
bit 3 stands for l3ethernet,
bit 4 stands for l3ge,
bit 5 stands for l3xge,
bit 6 stands for serial,
bit 7 stands for eacl,
bit 8 stands for tunnel,
bit 9 stands for olt,
bit 10 stands for nat.
37 traffic redirect to cpu
1, if supported.
38 set local precedence action
1, if supported.
39 wred action
1, if supported.
40 set qos local ID action
1, if supported.
41 match service vlan ID
If last 2 bits of this object are set to 1,
it indicates that the match type is supported,
bit 0 stands for service vlan list,
bit 1 stands for service vlan range.
42 set service vlan ID
1, if supported.
43 nest topmost vlan tag
If last 2 bits of this object are set to 1,
it indicates that the nest type is supported,
bit 0 stands for nest vlan ID,
bit 1 stands for nest cos.
44 priority map action
If last 21 bits of this object are set to 1,
it indicates that the priority map type is supported,
bit 0 stands for user def(Reserved right now),
bit 1 stands for 802.1p map to lp,
bit 2 stands for 802.1p map to dp,
bit 3 stands for 802.1p map to dscp,
bit 4 stands for dscp map to lp,
bit 5 stands for dscp map to dp,
bit 6 stands for dscp map to 802.1p,
bit 7 stands for dscp map to dscp,
bit 8 stands for exp map to lp,
bit 9 stands for exp map to dp,
bit 10 stands for lp map to 802.1p,
bit 11 stands for lp map to lp,
bit 12 stands for lp map to dscp,
bit 13 stands for up map to 802.1p,
bit 14 stands for up map to dscp,
bit 15 stands for dscp map to exp,
bit 16 stands for exp map to 802.1p,
bit 17 stands for exp map to dscp,
bit 18 stands for exp map to exp,
bit 19 stands for lp map to exp,
bit 20 stands for lp map to dp.
45 traffic redirect to aggregation group
1, if supported.
46 match local precedence
1, if supported.
47 match drop priority
1, if supported.
48 bind interface type
not supported.
49 flow based mirror to interface
If the bits of this object are set to 1,
it indicates that the flow based mirror to
interface type is supported.
50 flow based mirror to vlan
1, if supported.
51 flow based mirror to cpu
1, if supported.
52 qos policy support dynamic modified
not supported.
53 set forwarding class ID action
1, if supported.
54 colored priority map action
If last 22 bits of this object are set to 1,
it indicates that the priority map type is supported,
bit 0 stands for user def(Reserved right now),
bit 1 stands for 802.1p map to lp,
bit 2 stands for 802.1p map to dp,
bit 3 stands for 802.1p map to dscp,
bit 4 stands for dscp map to lp,
bit 5 stands for dscp map to dp,
bit 6 stands for dscp map to 802.1p,
bit 7 stands for dscp map to dscp,
bit 8 stands for exp map to lp,
bit 9 stands for exp map to dp,
bit 10 stands for lp map to 802.1p,
bit 11 stands for lp map to lp,
bit 12 stands for lp map to dscp,
bit 13 stands for up map to 802.1p,
bit 14 stands for up map to dscp,
bit 15 stands for dscp map to exp,
bit 16 stands for exp map to 802.1p,
bit 17 stands for exp map to dscp,
bit 18 stands for exp map to exp,
bit 19 stands for lp map to exp,
bit 20 stands for lp map to dp,
bit 21 stands for color map dp.
55 802.1q manipulation mode
If last 10 bits of this object are set to 1,
it indicates that the 802.1q manipulation mode
type is supported,
bit 0 stands for behavior check method,
bit 1 stands for behavior nest,
bit 2 stands for behavior remark,
bit 3 stands for classifier and,
bit 4 stands for classifier or,
bit 5 stands for classifier acl,
bit 6 stands for classifier customer vlan,
bit 7 stands for classifier service vlan,
bit 8 stands for classifier customer 802.1p,
bit 9 stands for classifier service 802,1p.
56 match service 802.1p
1, if supported.
qos interface generic module
Index Characteristic Value
1 hard If last 2 bits of this object are set to 1,
it indicates that the qos port type is supported,
bit 0 stands for soft, bit 1 stands for hard.
2 max bandwidth 1, if supported.
3 reserved bandwidth
1, if supported.
4 qm token 1, if supported.
flow template module
Index Characteristic Value
1 flow template function
1, if supported.
2 max number The max number of flow template(integer).
3 source IP address
1, if supported.
4 source IPv6 address
1, if supported.
5 destination IP address
1, if supported.
6 destination IPv6 address
1, if supported.
7 IP l3 protocol
1, if supported.
8 IPv6 l3 protocol
1, if supported.
9 dscp 1, if supported.
10 IPv6 dscp 1, if supported.
11 fragments 1, if supported.
12 IPv6 fragments
1, if supported.
13 source port
1, if supported.
14 destination port
1, if supported.
15 icmp type 1, if supported.
16 icmp code 1, if supported.
17 TCP flag 1, if supported.
18 source mac address
1, if supported.
19 source mac wildcast
1, if supported.
20 destination mac address
1, if supported.
21 destination mac wildcast
1, if supported.
22 eth protocol 1, if supported.
23 vlan ID 1, if supported.
24 cos 1, if supported.
25 cos service 1, if supported.
26 topmost vlan ID
1, if supported.
27 tos 1, if supported.
28 IPv6 tos 1, if supported.
29 IP precedence 1, if supported.
30 IPv6 precedence
1, if supported.
31 IPv6 icmp type
1, if supported.
32 IPv6 icmp code
1, if supported.
33 mpls exp 1, if supported.
46 offset type If last 7 bits of this object are set to 1,
it indicates that the flow template
extend offset type is supported,
bit 0 stands for start, bit 1 stands for l2,
bit 2 stands for mpls, bit 3 stands for IPv4,
bit 4 stands for IPv6, bit 5 stands for l4,
bit 6 stands for l5.
47 start offset The max value of start offset(integer).
48 start length The max value of start length(integer).
49 l2 offset The max value of l2 offset(integer).
50 l2 length The max value of l2 length(integer).
51 mpls offset The max value of mpls offset(integer).
52 mpls length The max value of mpls length(integer).
53 IPv4 offset The max value of IPv4 offset(integer).
54 IPv4 length The max value of IPv4 length(integer).
55 IPv6 offset The max value of IPv6 offset(integer).
56 IPv6 length The max value of IPv6 length(integer).
57 l4 offset The max value of l4 offset(integer).
58 l4 length The max value of l4 length(integer).
59 l5 offset The max value of l5 offset(integer).
60 l5 length The max value of l5 length(integer).
vqos and vacl module
Index Characteristic Value
1 vqos If last 2 bits of this object are set to 1,
it indicates that the vqos and vacl type is supported,
bit 0 stands for inbound,
bit 1 stands for outbound.
2 vacl If last 2 bits of this object are set to 1,
it indicates that the vacl type is supported,
bit 0 stands for inbound,
bit 1 stands for outbound.
3 vqos priority 1, if supported.
Statistic Module
Index Characteristic Value
1 current queue length statistic
1, if supported.
2 total queue length statistic
1, if supported.
3 queue drop pkt statistic
1, if supported.
4 current active wfq queue number statistic
1, if supported.
5 max number of active queue statistic
1, if supported.
6 total number of wfq queue statistic
1, if supported.
7 acl pkt number statistic
1, if supported.
8 acl byte number statistic
1, if supported.
9 car red pkt number statistic
1, if supported.
10 car red byte number statistic
1, if supported.
11 car green pkt number statistic
1, if supported.
12 car green byte number statistic
1, if supported.
13 car yellow pkt number statistic
1, if supported.
14 car yellow byte number statistic
1, if supported.
15 gts transmit pkt number statistic
1, if supported.
16 gts transmit byte number statistic
1, if supported.
17 gts delay pkt number statistic
1, if supported.
18 gts delay byte number statistic
1, if supported.
19 gts drop pkt number statistic
1, if supported.
20 gts drop byte number statistic
1, if supported.
21 lr transmit pkt number statistic
1, if supported.
22 lr transmit byte number statistic
1, if supported.
23 lr delay pkt number statistic
1, if supported.
24 lr delay pkt number statistic
1, if supported.
25 qos policy class match pkt statistic
1, if supported.
26 qos policy class match byte statistic
1, if supported.
27 account pkt number statistic
1, if supported.
28 account byte number statistic
1, if supported.
29 wred queue statistic
1, if supported.
30 wred precedence statistic
1, if supported.
31 wred green traffic statistic
1, if supported.
32 wred yellow traffic statistic
1, if supported.
33 wred red traffic statistic
1, if supported.
34 wred port based statistic
1, if supported.
35 hard interface queue statistic
1, if supported.
carl module
Index Characteristic Value
1 carl function
1, if supported.
2 match precedence
1, if supported.
3 match mac 1, if supported.
4 match dscp 1, if supported.
fifo module
Index Characteristic Value
1 fifo function 1, if supported.
2 set queue length
1, if supported.
3 default fifo queue length
The value of default fifo queue length(integer).
4 lower limit of fifo queue length
The lower limit value of fifo queue length(integer).
5 upper limit of fifo queue length
The upper limit value of fifo queue length(integer).
pq module
Index Characteristic Value
1 pq function 1, if supported.
2 match pql 1, if supported.
3 pql function 1, if supported.
4 pql match inbound interface
1, if supported.
5 pql match protocol
1, if supported.
6 set pql default queue
1, if supported.
7 pql default queue
The value of pql default queue(integer).
8 set pql queue length
1, if supported.
9 lower limit of pql queue length
The lower limit value of pql queue length(integer).
10 upper limit of pql queue length
The upper limit value of pql queue length(integer).
11 pql match local precedence
1, if supported.
cq module
Index Characteristic Value
1 cq function 1, if supported.
2 match cql 1, if supported.
3 cql function 1, if supported.
4 cql match inbound interface
1, if supported.
5 cql match protocol
1, if supported.
6 set cql default queue
1, if supported.
7 cql default queue
The default queue of cql(integer).
8 set cql queue length
1, if supported.
9 cql queue serving
1, if supported.
10 default cql queue length
The default length of cql queue(integer).
11 lower limit of cql queue length
The lower limit value of cql queue length(integer).
12 upper limit of cql queue length
The upper limit value of cql queue length(integer).
13 default cql queue serving
The value of default cql queue serving(integer).
14 lower limit of cql queue serving
The lower limit value of cql queue serving(integer).
15 upper limit of cql queue serving
The upper limit value of cql queue serving(integer).
16 cql match local precedence
1, if supported.
wfq module
Index Characteristic Value
1 wfq function 1, if supported.
2 match dscp 1, if supported.
3 match precedence
1, if supported.
4 set wfq queue length
1, if supported.
5 set wfq queue number
1, if supported.
6 default wfq queue length
The default length of wfq queue(integer).
7 lower limit of wfq queue length
The lower limit value of
wfq queue length(integer).
8 lower limit of wfq queue length
The upper limit value of
wfq queue length(integer).
9 default wfq queue number
The default number of wfq queue(integer).
10 lower limit of wfq queue number
The lower limit number of wfq queue(integer).
11 upper limit of wfq queue number
The upper limit number of wfq queue(integer).
12 lower limit number of wfq queue based on dscp
The lower limit number of wfq queue
based on dscp(integer).
13 upper limit number of wfq queue based on dscp
The upper limit number of wfq queue
based on dscp(integer).
rtpq module
Index Characteristic Value
1 rtpq function 1, if supported.
2 match start port
The value of match start port(integer).
3 match end port
The value of match end port(integer).
4 bandwidth 1, if supported.
5 cbs 1, if supported.
6 default start port
The value of default start port(integer).
7 lower limit of start port
The lower limit value of start port(integer).
8 upper limit of start port
The upper limit value of start port(integer).
9 default end port
The value of default end port(integer).
10 lower limit of end port
The lower limit value of end port(integer).
11 upper limit of end port
The upper limit value of end port(integer).
12 default bandwidth
The default value of bandwidth(integer).
13 lower limit of bandwidth
The lower limit value of bandwidth(integer).
14 upper limit of bandwidth
The upper limit value of bandwidth(integer).
15 default cbs The default value of cbs(integer).
16 lower limit of cbs
The lower limit value of cbs(integer).
17 upper limit of cbs
The upper limit value of cbs(integer).
18 queue length of low latency
The queue length of low latency(integer).