h3cCBQoSMatchRuleIntValue1 1.3.6.1.4.1.43.45.1.10.2.65.2.1.1.3.1.5

Value of Match Rule. IPv4 ACL: 2000~5999 IPv6 ACL: 2000~3999; 10000~42767 Software QoS: 2000~3999 Hardware Qos: 10000~42767 RtpPort: start-port: 2000~65535 IpPrec: value: 0~7, up to 8 value can be input. The bit set to 1 of the last 8 bits of h3cCBQoSMatchRuleIntValue1 is used to indicate the value 0~7. for example: 0x53(Binary format is 01010011) means the match rule is 'if-match ip-prec 0 1 4 6' Dscp: value:0~63,up to 8 value can be input. The bit set to 1 of h3cCBQoSMatchRuleIntValue1 is used to indicate the value 32~63. The bit set to 1 of h3cCBQoSMatchRuleIntValue2 is used to indicate the value 0~31. for example: 0x80000003 means the match rule is 'if-match dscp 32 33 63' Vlan8021p: value:0~7, up to 8 value can be input. The bit set to 1 of the last 8 bits of h3cCBQoSMatchRuleIntValue1 is used to indicate the value 0~7. for example: 0x53(Binary format is 01010011) means the match rule is 'if-match customer-dot1p 0 1 4 6' MplsExp: value:0~7, up to 8 value can be input. The bit set to 1 of the last 8 bits of h3cCBQoSMatchRuleIntValue1 is used to indicate the 8 value 0~7. for example: 0x53(Binary format is 01010011) means the match rule is 'if-match mpls 0 1 4 6' SourceIp: 1~4095 QosLocalID: 1~4095 AtmClp: 0~1 FrDe: 0~1 LocalPrecedence: 0~7, up to 8 value can be input. The bit set to 1 of the last 8 bits of h3cCBQoSMatchRuleIntValue1 is used to indicate the value 0~7. for example: 0x53(Binary format is 01010011) means the match rule is 'if-match localprecedence 0 1 4 6' DropPriority: 0~2, up to 3 value can be input. The bit set to 1 of the last 3 bits of h3cCBQoSMatchRuleIntValue1 is used to indicate the value 0~2. ServiceDot1p: 0~7, up to 8 value can be input. The bit set to 1 of the last 8 bits of h3cCBQoSMatchRuleIntValue1 is used to indicate the value 0~7. for example: 0x53(Binary format is 01010011) means the match rule is 'if-match service-dot1p 0 1 4 6' other types: Set is not permitted. 0xffffffff will be returned when getting.