a3RipIpExtPolCtl
1.3.6.1.4.1.43.2.8.2.1.8
This parameter controls which routes learned
by the Exterior Gateway Protocol (EGP) are
reported by RIP-IP. If this is set to all (1),
all routes learned from EGP or BGP are reported, provided
those routes are allowed to be reported by
the Network Policy (see a3RipIpNetPolCtl).
The metric that will be reported by RIP for all routes
learned via EGP or BGP is specified by a3RipIpExtPolAllMet.
If this is set to none (2), none of the routes
learned from EGP or BGP are reported.
If this is set to include (3), routes to destinations
listed in a3RipIpExtPolTable are reported. If no
routes are listed in a3RipIpExtPolTable, all routes
are reported. This applies to the other policy tables
as well.
If this is set to exclude (4), all routes
are reported except those listed in a3RipIpExtPolTable.
If no routes are listed in a3RipIpExtPolTable, no routes
are reported. This applies to the other policy tables
as well. The metric reported for routes learned via EGP or BGP
in this case is calculated using the formula specified in
a3RipIpImpMetTable (for egp or bgp).
(note, in all these cases, Network Policy must be
passed before this policy is applied).
If this objects gets changed from include to exclude,
or from exclude to include, all existing entries will
be flushed from the table.