a3ComPortBoundaryEncap
1.3.6.1.4.1.43.2.17.2.1.4
This object decides the packet encapsulation rules
to be applied to outgoing packets. If this is set
to none (5), the boundary router on the other end of
the serial link is capable of supporting translation.
In this case, all bridged packets will be sent unchanged.
Boundary routed packets will be sent with the default
mode: Ethernet. All other settings of this object
implies that the remote device does not support translation.
Therefore, all packets must be encapsulated according to
this object. In order for any modifications to take
effect, the port associated with this command must be
disabled and then enabled.
Note, this only applies to serial ports on a NB2. For
all non-serial ports, this object will have the value
notApplicable(1).