This object specifies the IIO or CEC
boards that will dump and reboot in the event
this IIO or CEC board crashes. This
object is relevant only if the value of
a3sysIioRecoveryProcedure is
selectiveDumpAndReboot (6).
The boards are specified by their slot. Each
slot is represented by a single bit in the
value of this object. If that bit is set (to
1), then that board will dump and reboot.
Slot 0 is used to identify the CEC board, and
corresponds to the least significant bit in
this object.
Slot 1 is used to identify the IIO board in
that slot and corresponds to the next
significant bit in this object. The identification
of all other boards follows this convention.