A3COM-HUAWEI-DOT11-CFG-MIB

This MIB provides information about WLAN configuration. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Association The service used to establish access point or station mapping and enable station invocation of the distribution system services. (Wireless clients attempt to connect to access points.) Basic Rate A data rate that is mandatory for client devices to support in order for them to achieve successful association. MSDU MAC Service Data Unit, it is frame format defined by 802.11. TU It is 1,024 microseconds (ms), which is about 1 millisecond. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key.

MIB content (307 objects)

Informations

Organization
Hangzhou H3C Technologies Co., Ltd.
Contact info
Platform Team H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip: 100085

Revisions

2010-09-25 18:00
Modified to remove some issue.
2010-09-02 18:00
Modified to add new node.
2009-07-29 18:00
Modified to add new nodes and new table.
2009-05-07 20:00
Modified to add new nodes and new table.
2009-03-20 15:30
Modified to add new value for appointed node.
2008-11-07 15:30
Modified to add new nodes and new table.
2008-07-09 18:00
Modified to add new groups.
2008-02-25 18:00
Modified to add new nodes.
2007-12-21 18:00
Modified to add new nodes.
2007-10-09 16:55
changed for new requirements
2007-06-19 18:00
Modified to add new table.
2007-04-27 20:00
Modified to fix some issue.
2007-02-01 20:00
Modified to support fat AP.
2006-05-10 19:00
The initial revision of this MIB module.