P2mpRadioSignalAttribute

• Base type Enumeration

This represents the set of radio signal attributes that may be monitored in a point to multipoint system by using histograms, timelines, and thresholds. Some of these attributes are common to the head end (HE) and the subscriber unit (SU) whereas some are specific to either the HE or the SU. The attributes are: none(0) - This is a special value reserved to indicate that there is no threshold associated with a timeline. This attribute cannot be used to create a histogram, timeline, or threshold. rsaSinrMainAnt(1) - This is the Interference + Noise power level computed by the hardware at the main antenna on a burst by burst basis rsaSinrDiversityAnt(2) - This is the Interference + Noise power level computed by the hardware at the diversity antenna on a burst by burst basis. rsaSinrRatio(3) - Ratio of (Interference + Noise) in main antenna to diversity antenna rsaTimingOffset(4) - This represents the timing delay variations detected on a radio link. rsaRxPowerMainAnt(5) - This is a measure of the analog signal power received at the main antenna RF head on a burst by burst basis. rsaRxPowerDiversityAnt(6) - This is a measure of the analog signal power received at the diversity antenna RF head on a burst by burst basis. rsaChDelaySpreadMainAnt(7) - Number of samples that the channel response remains within (TBD) db of the manimun TAP in the channel response at the main antenna. rsaChDelaySpreadDiversityAnt(8) - Number of samples that the channel response remains within (TBD) db of the manimun TAP in the channel response at the diversity antenna. rsaHeAmbientNoise(19) - The ambient noise (in dB) is measured when there is no signal being received at the Headend rsaSuRxPowerDeltaMainAnt(10) - Change in received power (dB) at the main antenna of the subscriber unit on a burst by burst basis. rsaSuRxPowerDeltaDiversityAnt(11) - Change in received power (dB) at the diversity antenna of the subscriber unit on a burst by burst basis. rsaSuTotalTxPower(12) - The sum of -20 dBm (reference level out of the DAC) + Tx IF transmit gain - 13 dBm (cable compensation) + Tx RF transmit gain. This parameter does not include antenna gains.