RttMonProtocol

• Base type Enumeration

Specifies the protocol to be used to perform the timed echo request/response. The following protocols are defined: NOTE: All protocols that end in 'Appl' will support the asymetric request/response (ARR) protocol. See the DESCRIPTION for ciscoRttMonMIB for a complete description of the asymetric request/response protocol. notApplicable - no protocol is defined ipIcmpEcho - uses Echo Request/Reply as defined in RFC792 for Internet Protocol networks ipUdpEchoAppl - uses the UDP based echo server snaRUEcho - uses the REQECHO and ECHOTEST RU's to an SSCP over an SNA LU-SSCP session snaLU0EchoAppl - uses test RU's sent to the Echo Server over an SNA LU0-LU0 session snaLU2EchoAppl - uses test RU's sent to the Echo Server over an SNA LU2-LU2 session snaLU62Echo - uses the native appn ping ie. aping snaLU62EchoAppl - uses test RU's sent to the ARR Echo Server over an SNA LU6.2-LU6.2 session appleTalkEcho - uses Echo Request/Reply as defined for appleTalk networks appleTalkEchoAppl - uses the appleTalk based echo server decNetEcho - uses Echo Request/Reply as defined for DECNet networks decNetEchoAppl - uses the DECnet based echo server ipxEcho - uses Echo Request/Reply as defined for Novell IPX networks ipxEchoAppl - uses the Novel IPX based echo server isoClnsEcho - uses Echo Request/Reply as defined for ISO CLNS networks isoClnsEchoAppl - uses the ISO CLNS based echo server vinesEcho - uses Echo Request/Reply as defined for VINES networks vinesEchoAppl - uses the VINES based echo server xnsEcho - uses Echo Request/Reply as defined for XNS networks xnsEchoAppl - uses the XNS based echo server apolloEcho - uses Echo Request/Reply as defined for APOLLO networks apolloEchoAppl - uses the APOLLO based echo server netbiosEchoAppl - uses the netbios based echo server ipTcpConn - uses the tcp's connect mechanism httpAppl - uses udp for name resolution, tcp connect and tcp data transfer mechanisms for HTTP data download from a particular HTTP Server dnsAppl - uses udp for name resolution jitterAppl - uses udp for packet transfers dlswAppl - uses tcp for sending keepalives dhcpAppl - uses udp for sending dhcp requests ftpAppl - uses tcp for connect & data transfer mplsLspPingAppl - uses MPLS Echo Request/Response as per draft-ietf-mpls-lsp-ping-04 ietf standard voipAppl - uses Symphony infrastructure to measure H.323/SIP call set up time rtpAppl - uses Symphony infrastructure to measure rtp packets delay variance. icmpJitterAppl - uses ICMP Timestamp for packet transfer to measure jitter. ethernetPingAppl - uses regular 802.1ag loopback frame ethernetJitterAppl - uses CFM frames . videoAppl - uses synthetic traffic depending on video profile