FcIfOperStatusReason

• Base type Enumeration

The cause of current operational state of the port. GLOSSARY: BB - Buffer-to-Buffer. BB_Credit - Buffer-to-Buffer credit, a link level flow control mechanism. B_Port - A Fibre Channel, Bridging port. BPDU - Bridge Protocol Data Unit. CDP - Cisco Discovery Protocol. Class F - A connectionless service with notification on non-delivery between E_Ports, used for control, coordination, and configuration of the Fabric. Class N - Refers to any class of service (different types of frame delivery services) other than Class F. E_D_TOV - Error Detect Timeout Value. ENM - Egress Non-Multicast. ELP - Exchange Link Parameter. E-mode - A fibre channel port providing E_Port functionality. E_Port - A Fabric Expansion Port. EPP - Exchange Peer Parameters. ESC - Exchange Switch Capabilities. Fabric - The set of physically connected fibre channel switches. FEX - Fabric EXtender. FC-FS - Fibre Channel Framing and Signaling. FCIP - Fibre Channel over IP protocol. FCID - Fibre Channel Domain ID. FCOE - Fibre Channel Over Ethernet. FCOT - Fibre channel optical transmitter. FC-PH - The Fibre Channel Physical and Signaling standard. FCSP - Fibre Channel Security Protocol. Fibre Channel - The primary protocol for building SANs. FICON - An I\O protocol used between IBM (and compatible) mainframes and storage. FLOGI - Fabric Login, used by a node port to establish a session with the fabric. GBIC - Gigabit Interface Converter; a removable transceiver module permitting Fibre Channel and Gigabit Ethernet physical-layer transport. Interconnect_Ports - Switch Ports that assume either the E_Port or B_Port mode are generally referred to as Interconnect_Ports. LACP - Link Access Control Protocol. LIP - Loop Initialization Primitive sequence. LR - Link Reset, the FC-PH defined primitive sequence used to initiate a link reset. MTU - Maximun transmission unit. NOS - Not Operational Sequence, the FC-PH defined primitive sequence to indicate that the transmitting port has detected a link failure (or) offline condition. VIC - Virtual Interface Card. VPC - Virtual Port Channel. NPIV - N Port Identifier Virtualization. NPV - NPort Virtualizer. Nx_Port - A Fiber Channel Node Port. OLS - Offline Sequence, the FC-PH defined primitive sequence to indicate that the port is entering into offline state. OHMS - Online Health Management System. PMON - Port Monitor. R_A_TOV - Resource Allocation Timeout Value. RCF - Reconfigure Fabric. Rxbbcredit - Receive BB credit value configured for a FC interface. SAN - Storage Area Network; a network linking computing devices to disk or tape arrays and other devices over Fibre Channel. SIF - Service Information Field. SDM - Security Device Manager. SDP - Secure Device Provisioning. SFP - Small Formfactor Pluggable. TE_Port - Trunking E_Port. TOV - Time out value. UDLD - Uni Directional Link Detection. VDC - Virtual Device Context. VEM - Virtual Ethernet Module. VFC - Virtual Fibre Channel. VRF - VPN Routing and Forwarding. VSAN - Virtual Storage Area Network. WWN - World Wide Name. xE_Port - A Fiber channel port that can assume either E_Port or TE_Port mode. The enumerated values which provides the cause of the current operational state of the interface are: 'other(1)' - reasons other than defined here. 'none(2)' - no failure 'hwFailure(3)' - hardware failure. 'loopbackDiagFailure(4)' - loopback diagnostics failure. 'errorDisabled(5)' - the port is not operational due to some error conditions that require administrative attention. 'swFailure(6)' - software failure. 'linkFailure(7)' - physical link failure. 'offline(8)' - physical link is in offline state as defined in the FC-FS standards. 'nonParticipating(9)' - during loop initialization, the port is not allowed to participate in loop operations. 'initializing(10)' - port is being initialized. 'vsanInactive(11)'- port VSAN is inactive. The port becomes operational again when the port VSAN is active. 'adminDown(12)' - 'ifAdminStatus' is down(2). 'channelAdminDown(13)' - this port is a member of a port channel and that port channel's ifAdminStatus is 'down(2)'. 'channelOperSuspended(14)' - this port is a member of a port channel and its operational parameters are incompatible with the port channel parameters. 'channelConfigurationInProgress(15)' - this port is undergoing a port channel configuration. 'rcfInProgress(16)' - an isolated xE_port is transmiting an reconfigure fabric, requesting a disruptive reconfiguration in an attempt to build a single, non-isolated fabric. Only the Interconnect_Ports can become isolated. 'elpFailureIsolation(17)' - during a port initialization the prospective Interconnect_Ports find incompatible link parameters. 'escFailureIsolation(18) - during a port initialization the prospective Interconnect_Ports are unable to proceed with initialization as a result of Exchange Switch Capabilities (ESC). 'domainOverlapIsolation(19)' - there is a overlap in domains while attempting to connect two existing fabrics. 'domainAddrAssignFailureIsolation(20)' - the elected principal switch is not capable of performing domain address manager functions so no Nx_port traffic can be forwarded across switches, hence all Interconnect_Ports in the switch are isolated. 'domainOtherSideEportIsolation(21)' - the peer e-port is isolated. 'domainInvalidRCFReceived(22)' - Invalid rcf received. 'domainManagerDisabled(23) - domain manager is disabled. 'zoneMergeFailureIsolation(24)' - the two Interconnect_Ports cannot merge zoning configuration after having exchanged merging request for zoning. 'vsanMismatchIsolation(25)' - this vsan is not configured on both sides of a trunk port. 'parentDown(26)' - the physical port to which this interface is bound is down. 'srcPortNotBound(27)'- no source port is specified for this interface. 'interfaceRemoved(28)' - interface is being removed. 'fcotNotPresent(29)' - fcot(GBIC) not present. 'fcotVendorNotSupported(30)' - fcot(GBIC) vendor is not supported. 'incompatibleAdminMode(31)' - port admin mode is incompatible with port capabilities. 'incompatibleAdminSpeed(32)' - port speed is incompatible with port capabilities. 'suspendedByMode(33)' - port that belongs to a port channel is suspended due to incompatible operational mode. 'suspendedBySpeed(34)' - port that belongs to a port channel is suspended due to incompatible operational speed. 'suspendedByWWN(35)' - port that belongs to a port channel is suspended due to incompatible remote switch WWN. 'domainMaxReTxFailure(36)' - domain manager failure after maximum retries. 'eppFailure(37)' - trunk negotiation protocol failure after maximum retries. 'portVsanMismatchIsolation(38)' - an attempt is made to connect two switches using non-trunking ports having different port VSANs. 'loopbackIsolation(39)' - port is connected to another port in the same switch. 'upgradeInProgress(40)' - linecard upgrade in progress. 'incompatibleAdminRxBBCredit(41)' - receive BB credit is incompatible. 'incompatibleAdminRxBufferSize(42)' - receive buffer size is incompatible. 'portChannelMembersDown(43)' - no operational members. 'zoneRemoteNoRespIsolation(44)' - isolation due to remote zone server not responding. 'firstPortUpAsEport(45)' - in a over subscribed line card, when the first port in a group is up in E mode, other ports in that group cannot be brought up. 'firstPortNotUp(46)' - in a over subscribed line card, first port cannot be brought up in E-mode when the other ports in the group are up. 'peerFCIPPortClosedConnection(47)' - port went down because peer FCIP port closed TCP connection. 'peerFCIPPortResetConnection(48)' - port went down because the TCP connection was reset by the peer fcip port. 'fcipPortMaxReTx(49)' - fcip port went down due to max tcp re-transmissions reached the configured limit. 'fcipPortKeepAliveTimerExpire(50)' - fcip port went down due to TCP keep alive timer expired. 'fcipPortPersistTimerExpire(51)' - fcip port went down due to TCP persist timer expired. 'fcipPortSrcLinkDown(52)' - fcip port went down due to ethernet link down. 'fcipPortSrcAdminDown(53)' - fcip port went down because the source ethernet link was administratively shutdown. 'fcipPortAdminCfgChange(54)' - fcip port went down due to configuration change. 'fcipSrcPortRemoved(55)' - fcip port went down due to source port removal. 'fcipSrcModuleNotOnline(56)' - fcip port went down due to source module not online. 'invalidConfig(57)' - this port has a misconfiguration with respect to port channels. 'portBindFailure(58)' - port got isolated due to port bind failure. 'portFabricBindFailure(59)' - port got isolated due to fabric bind failure. 'noCommonVsanIsolation(60)' - trunk is isolated because there are no common vsans with peer. 'ficonVsanDown' - Ficon vsan down 'invalidAttachment' - Invalid attachment 'portBlocked' - Port blocked due to Ficon 'incomAdminRxBBCreditPerBuf' - disabled due to incompatible admin port rxbbcredit, performance buffers. 'tooManyInvalidFLOGIs' - Suspended due to too many invalid flogis. 'deniedDueToPortBinding' - Suspended due to port binding. 'elpFailureRevMismatch' - Isolated for ELP failure due to revision mismatch. 'elpFailureClassFParamErr' - Isolated for ELP failure due to class F param error. 'elpFailureClassNParamErr' - Isolated for ELP failure due to class N param error. 'elpFailureUnknownFlowCTLCode' - Isolated for ELP failure due to invalid flow control code 'elpFailureInvalidFlowCTLParam' - Isolated for ELP failure due to invalid flow control param. 'elpFailureInvalidPortName' - Isolated for ELP failure due to invalid port name. 'elpFailureInvalidSwitchName' - Isolated for ELP failure due to invalid switch name. 'elpFailureRatovEdtovMismatch' - Isolated for ELP failure due to R_A_TOV or E_D_TOV mismatch. 'elpFailureLoopbackDetected' - Isolated for ELP failure due to loopback detected. 'elpFailureInvalidTxBBCredit' - Isolated for ELP failure due to invalid transmit B2B credit. 'elpFailureInvalidPayloadSize' - Isolated for ELP failure due to invalid payload size. 'bundleMisCfg' - misconfiguration in portchannel membership detected. 'bitErrRTThresExceeded' - bit error rate too high. 'linkFailLinkReset' - link failure due to link reset. 'linkFailPortInitFail' - link failure due to port initialization failure. 'linkFailPortUnusable' - link failure due to port unusable. 'linkFailLossOfSignal' - link failure due to loss of signal. 'linkFailLossOfSync' - link failure due to loss of sync. 'linkFailNOSRcvd' - link failure due to non-operational sequences received. 'linkFailOLSRcvd' - link failure due to offline sequences received. 'linkFailDebounceTimeout' - link failure due to re-negotiation failed. 'linkFailLRRcvdB2B' - link failure when link reset(LR) operation fails due to non-empty receive queue. 'linkFailCreditLoss' - link failure due to excessive credit loss indications. 'linkFailRxQOverFlow' - link failure due to receive queue overflow. 'linkFailTooManyINTR' - link failure due to excessive port interrupts. 'linkFailLIPRcvdB2B' - link failure when loop initialization(LIP) operation fails due to non empty receive queue. 'linkFailCreditLossB2B' - link failure when link reset(LR) operation fails due to queue not empty. 'linkFailOPNyTMOB2B' - link failure due to open primitive signal timeout while receive queue not empty. 'linkFailOPNyRETB2B' - link failure due to open primitive signal returned while receive queue not empty. 'linkFailLIPF8Rcvd' - link failure due to F8 LIP received. 'linkFailLineCardPortShutdown' - link failure due to port shutdown. 'fcspAuthenfailure' - fibre channel security protocol authorization fail. 'fcotChksumErr' - FCOT SPROM checksum error. 'ohmsExtLBTest' - link suspended due to external loopback diagnostics failure. 'invalidFabricBindExh' - invalid fabric binding exchange. 'tovMismatch' - link isolation due to TOV mismatch. 'ficonNotEnabled - Ficon not enabled. 'ficonNoPortnumber' - no Ficon portnumber. 'ficonBeingEnabled' - Ficon is being enabled. 'ePortProhibited' - port down because FICON prohibit mask in place for E/TE port. 'portGracefulShutdown' - port has been shutdown gracefully. 'trunkNotFullyActive' - some of the VSANs which are common with the peer are not up. 'fabricBindingSWWNNotFound' - Peer switch WWN not found in fabric binding active database. 'fabricBindingDomainInvalid' - Peer domain ID is invalid in fabric binding active database. 'fabricBindingDBMismatch' - fabric binding active database mismatch with peer. 'fabricBindingNoRspFromPeer' - fabric binding no response from peer. 'vsanSuspended' - dynamic VSAN is suspended. 'vsanNotFound' - dynamic VSAN not found. 'trackedPortDown' - tracked port is down. 'ecSuspendedLoop' - EC is currently suspended for loopback. 'isolatedBundle' - isolated bundle due to misconfigurations. 'peerNotSupportBundle' - peer deivice does not support port channel. 'portBringupIsolation' - trunk port isolated during bringup time. 'domainNotAllowedIsolated' - port isolated due to domain not allowed. 'virtualIvrDomainOverlapIsolation' - port isolated due to virtual IVR domain overlap. 'outOfService' - port is in out of service state. 'portAuthFailed' - port has encountered an 802.1x authentication failure. 'bundleStandby' - port cannot be brought up in a bundle, since the bundle has maximum members. 'portConnectorTypeErr' - Error in the port connector type (SFP). 'errorDisabledReInitLimitReached' - the port is not operational after trying to initialize the port multiple times due to some errors. 'ficonDupPortNum' - the FICON VSAN has a duplicate port number. 'localRcf' - local disruptive reconfiguration (the local domain became invalid; no RCF frames have been sent outside the local switch). 'twoSwitchesWithSameWWN' - merge attempt between VSANs containing the same WWN. If the user attempts to merge two different VSANs and both have at least one switch with the same WWN then the link in between the VSANs is isolated. 'invalidOtherSidePrincEFPReqRecd' - EFP request frame indicating a principal switch other than the locally known one. 'domainOther' - other domain manager reasons not defined here. 'elpFailureAllZeroPeerWWNRcvd' - isolated for ELP failure due to peer WWN is received with all zeros. 'preferredPathIsolation' - port isolated due to preferred path not able to program the routes. 'fcRedirectIsolation' - port isolated due to FC Redirect not being able to program routes. 'portActLicenseNotAvailable' - port not brought up due to lack of port activation licenses. 'sdmIsolation' - port isolated due to SDM not being able to program routes. 'fcidAllocationFailed' - port down due to failure in FCID allocation. 'externallyDisabled' - port externally disabled. 'unavailableNPVUpstreamPort' - NPV upstream port not available. 'unavailableNPVPrefUpstreamPort' - NPV preferred upstream port not available. 'sfpReadError' - the port is not operational due to SFP read error. 'stickyDownOnLinkFailure' - the port is not operational due to link failure in the sticky down mode. 'tooManyLinkFlapsErr' - too many link flaps on the port in a short interval. 'unidirectionalUDLD' - unidirectional UDLD detected. 'txRxLoopUDLD' - UDLD Tx Rx loop. 'neighborMismatchUDLD' - UDLD neighbor mismatch. 'authzPending' - authorization pending. 'hotStdbyInBundle' - hot standby in bundle. 'incompleteConfig' - all parameters on the port have not been configured. 'incompleteTunnelCfg' - incomplete tunnel config. 'hwProgrammingFailed' - hardware programming failed. 'tunnelDstUnreachable' - no route to tunnel destination address. 'suspendByMtu' - MTU allocation failed. 'sfpInvalid' - SFP is not Cisco certified. 'sfpAbsent' - SFP is absent. 'portCapabilitiesUnknown' - the capabilities of the port are unknown. 'channelErrDisabled' - the port-channel to which the port belongs is in error disabled state. 'vrfMismatch' - Mismatch in source and transport VRF. 'vrfForwardReferencing' - Forward referencing transport VRF. 'dupTunnelConfigDetected' - two tunnel interfaces with same configuration is not allowed. 'primaryVLANDown' - primary VLAN is in down state. 'vrfUnusable' - VRF is unusable. 'errDisableHandShkFailure' - port is not operational due to an internal handshake failure. 'errDisabledBPDUGuard' - BPDUGuard triggered error disable on the port. 'dot1xSecViolationErrDisabled' - error disabled due to dot1x security violation. 'emptyEchoUDLD' - UDLD empty echo. 'vfTaggingCapErr' - VF Tagging capability mismatch error. 'portDisabled' - Port disabled. 'tunnelModeNotConfigured' - Tunnel Mode is not configured. 'tunnelSrcNotConfigured' - Tunnel Source is not configured. 'tunnelDstNotConfigured' - Tunnel Destination is not configured. 'tunnelUnableToResolveSrcIP' - Unable to resolve tunnel source IP address. 'tunnelUnableToResolveDstIP' - Unable to resolve tunnel destination IP address. 'tunnelVrfDown' - Tunnel VRF down. 'sifAdminDown' - SIF is admin down. 'phyIntfDown' - Physical interface is down. 'ifSifLimitExceeded' - Interface SIF limit is exceeded. 'sifHoldDown' - SIF hold down. 'noFcoe' - No FCOE configuration. 'dcxCompatMismatch' - DCX Compatibility Mismatch. 'isolateBundleLimitExceeded' - Isolation due to bundle limit exceeded. 'sifNotBound' - SIF is not bound. 'errDisabledLacpMiscfg' - Error Disabled due to LACP misconfig. 'satFabricIfDown' - Satellite fabric interface down. 'invalidSatFabricIf' - Invalid satellite fabric interface. 'noRemoteChassis' - No remote chassis. 'vicEnableNotReceived' - VIC enable not received. 'vicDisableReceived' - VIC disable received. 'vlanVsanMappingNotEnabled' - VLAN VSAN mapping not enabled. 'stpNotFwdingInFcoeMappedVlan' - STP not forwarding in FCOE Mapped Vlan. 'moduleOffline' - Module Offline. 'udldAggModeLinkFailure' - UDLD aggresive mode link failure. 'stpInconsVpcPeerDisabled' - STP inconsistent VPC peer disabled. 'setPortStateFailed' - Set port state failed. 'suspendedByVpc' - Suspended by VPC. 'vpcCfgInProgress' - VPC configuration in progress. 'vpcPeerLinkDown' - VPC peer link down. 'vpcNoRspFromPeer' - VPC no response from peer. 'protoPortSuspend' - Proto port suspend. 'tunnelSrcDown' - Tunnel source down. 'cdpInfoUnavailable' - CDP information unavailable. 'fexSfpInvalid' - FEX SFP invalid. 'errDisabledIpConflict' - Error Disabled due to IP conflict. 'fcotClkRateMismatch' - FCOT CLK rate mismatch. 'portGuardTrustSecViolation' - Error disabled due to port guard (Cisco Trusted Security Violation). 'sdpTimeout' - SDP timeout. 'satIncompatTopo' - Satellite incompatible topology. 'waitForFlogi' - Wait for FLOGI. 'satNotConfigured' - Satellite not configured. 'npivNotEnabledInUpstream' - NPIV not enabled in upstream. 'vsanMismatchWithUpstreamSwPort' - VSAN mismatch with upstream switch port. 'portGuardBitErrRate' - Error disabled due to port guard (Bit Error Rate). 'portGuardSigLoss' - Error disabled due to port guard (Signal Loss). 'portGuardSyncLoss' - Error disabled due to port guard (Sync Loss). 'portGuardLinkReset' - Error disabled due to port guard (Link Reset). 'portGuardCreditLoss' - Error disabled due to port guard (Credit Loss). 'ipQosMgrPolicyAppFailure' - IP QOS Manager policy application failure. 'pauseRateLimitErrDisabled' - Port error disabled due to pause rate limit condition. 'lstGrpUplinkDown' - EthPM LSTGRP downstream link down due to upstream link down. 'stickyDnLinkFailure' - Port kept in error disabled state due to Link Failure. 'routerMacFailure' - Router MAC failure. 'dcxMultipleMsapIds' - Port error disabled due to multiple MSAP IDs (DCX). 'dcxHundredPdusRcvdNoAck' - Hundred PDUs received without ACK (DCX). 'enmSatIncompatibleUplink' - Satellite Incompatible Uplink. 'enmLoopDetected' - Loop Detected (ENM). 'nonStickyExternallyDisabled' - Disabled by VPD Manager with SHut/No Shut allowed. 'subGroupIdNotAssigned' - Sub-group ID not assigned. 'vemUnlicensed' - VEM Unlicensed. 'profileNotFound' - Profile not found. 'nonExistentVlan' - VLAN does not exist. 'vlanInvalidType' - Invalid VLAN type. 'vlanDown' - VLAN down. 'vpcPeerUpgrade' - VPC Peer Upgrade. 'ipQosDcbxpCompatFailure' - IPQOS DCBXP compatibility failure. 'nonCiscoHbaVfTag' - Error Disabled due to Non-Cisco HBA VF Tag. 'domainIdConfigMismatch' - Domain ID config mismatch. 'sfpSpeedMismatch' - SFP speed mismatch. 'xcvrInitializing' - Transceiver initializing. 'xcvrAbsent' - Transceiver absent. 'xcvrInvalid' - Transceiver invalid. 'vfcBindingInvalid' - Invalid VFC Binding. 'vlanNotFcoeEnabled' - VLAN down due to FCOE disabled. 'pvlanNativeVlanErr' - Private VLAN - Native VLAN error. 'ethL2VlanDown' - Ethernet L2 VLAN down. 'ethIntfInvalidBinding' - Invalid Binding to Ethernet Interface. 'pmonFailure' - PMON Failure. 'l3NotReady' - L3 not ready. 'speedMismatch' - Speed Mismatch. 'flowControlMismatch' - Flow Control Mismatch. 'vdcMode' - VDC mode 'suspendedDueToMinLinks' - Suspended due to Min Links. 'enmPinFailLinkDown' - ENM Pin Fail Link Down. 'inactiveM1PortFpathActiveVlan' - Inactive M1 Port F Path Active VLAN. 'parentPortDown' - Parent Port Down. 'moduleRemoved' - Module Removed. 'corePortMct' - Core Port MCT. 'nonCorePortMct' - Non Core port MCT. 'ficonInorderNotActive'- FICON Inorder Not Active. 'invalidEncapsulation' - Invalid Encapsulation. 'modemLineDeasserted' - Modem line asserted. 'ipSecHndshkInProgress' - IP Sec Handshake in progress. 'sfpEthCompliantErr' - Sfp Ethernet compliant error. 'cellularModemUnattached' - Cellular Modem unattached. 'outOfGlblRxBuffers' - Out of global Rx buffers. 'sfpFcCompliantErr' - Sfp Fc Compliant Error. 'ethIntfNotLicensed' - Ethernet interface not licensed. 'domainIdsInvalid' - Domain IDs Invalid. 'fabricNameInvalid' - Fabric Name Invalid. 'ficonNoPortSwapLogicalPort' - Ficon No Port Swap Logical Port. 'ficonInvalidPortNum ' - Ficon Invalid Port Number. 'remotePortInL2vpnDown' - Remote Port in L2VPN Down. 'suspendedDueToNoLacpPdus' - Suspended due to no LACP PDUs. 'fcotValidationFailedAtDriver' - Fcot validation failed at driver. 'unsupportedTransceiverMd5DigestNotSame' - Unsupported transceiver MD5 digest not Same. 'unsupportedTransceiver' - Unsupport transceiver. 'adminStateConfigChange' - Admin state config change. 'vlanAllowedList' - Allowed Vlan list configured on the port. 'vlanAllowedListOverride' - Allowed Vlan list changed on the port. 'vlanAllowedListAdd' - Vlan has been added to the allowed Vlan list on the port. 'vlanAllowedListRemove' - Vlan has been removed from the allowed Vlan list on the port. 'vlanCfgStateChange' - Port affected due to Vlan state change. 'vlanCfgDelete' - Port affected due to Vlan delete. 'pppPeerNotResponding' - ppp peer not responding. 'pppAuthFailed' - ppp authentication failed. 'xcvrAuthFailed' - Transceiver authentication failed. 'badFramesRcvdFromLink' - Excessive bad frames received from link.