ruckusZF7761CMControlLED

• 1.3.6.1.4.1.25053.3.1.4.7.3
• Access readwrite
• Type ledPerCM(1), ledPerAP(2), ledAlternateMode1Mode2OneHour(3), ledAlternateMode1Mode2Mode6(4), blueActive(5), blueActiveCMOnlineLed(6), ledAllOff(7), heartbeatOffCM(8), heartbeatOffAP(9), softResetAP(10), powerCycleAP(11), factoryResetAP(12), softResetCM(13), powerCycleCM(14), factoryResetCM(15) ?

  ledPerCM(1), ledPerAP(2), ledAlternateMode1Mode2OneHour(3), ledAlternateMode1Mode2Mode6(4), blueActive(5), blueActiveCMOnlineLed(6), ledAllOff(7), heartbeatOffCM(8), heartbeatOffAP(9), softResetAP(10), powerCycleAP(11), factoryResetAP(12), softResetCM(13), powerCycleCM(14), factoryResetCM(15)

  This type is not a standard SMI/SNMP base type and is not defined as a documented TEXTUAL-CONVENTION in this MIB.

  It was extracted as raw syntax from the source MIB file and could not be resolved to a known type definition.

• Default ledPerCM

ledPerCM(1): LEDs enabled per Cable Modem definition, ledPerAP(2): LEDs configured per Access Point definition, ledAlternateMode1Mode2OneHour(3): Alternalte between modes 1 and 2 at a 30 second period then disabled after one hour, ledAlternateMode1Mode2Mode6(4): Alternalte between modes 1 and 2 at a 30 second period and then go to mode 6 blueActive(5): Blue Active Surge Protection Indicator, blueActiveCMOnlineLed(6): Blue Active Surge Protection Indicator and Cable Modem online Green LED enabled, ledAllOff(7): All LEDs disabled, heartbeatOffCM(8): Disable Cable Modem heartbeat monitoring, heartbeatOffAP(9): Disable Access Point heartbeat monitoring, softResetAP(10): Soft reset of Access Point, powerCycleAP(11): Power cycle Access Point, factoryResetAP(12): Reset Access Point to factory defaults, softResetCM(13): Soft reset of Cable Modem, powerCycleCM(14): Power cycle Cable Modem, factoryResetCM(15): Reset Cable Modem to factory defaults