mplsXCEntry

  • 1.3.6.1.4.1.2011.5.12.1.1.9.1
  • Access notifyonly
  • Type Unknown
  • Default false

A row in this table represents one cross-connect entry. The following objects index it: - cross-connect index mplsXCIndex that uniquely identifies a group of cross-connect entries - interface index of the in-segment, mplsInSegmentIfIndex - incoming label(s), mplsInSegmentLabel - out-segment index, mplsOutSegmentIndex Originating LSPs: These are represented by using the special combination of values mplsInSegmentIfIndex=0 and mplsInSegmentLabel=0 as indexes. In this case the mplsOutSegmentIndex MUST be non-zero. Terminating LSPs: These are represented by using the special value mplsOutSegmentIndex=0 as index. Special labels: Entries indexed by reserved MPLS label values 0 through 15 imply terminating LSPs and MUST have mplsOutSegmentIfIndex = 0. Note that situations where LSPs are terminated with incoming label equal to 0, should have mplsInSegmentIfIndex = 0 as well, but can be distinguished from originating LSPs because the mplsOutSegmentIfIndex = 0. The mplsOutSegmentIfIndex MUST only be set to 0 in cases of terminating LSPs. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol.

Details

Table index
  1. mplsXCIndex
  2. mplsInSegmentIfIndex
  3. mplsInSegmentLabel
  4. mplsOutSegmentIndex

Table columns

9 objects
Oid Name Access Type
1.3.6.1.4.1.2011.5.12.1.1.9.1.1 mplsXCIndex notifyonly Unknown
1.3.6.1.4.1.2011.5.12.1.1.9.1.2 mplsXCLspId readwrite MplsLSPID
1.3.6.1.4.1.2011.5.12.1.1.9.1.3 mplsXCLabelStackIndex readwrite Unknown
1.3.6.1.4.1.2011.5.12.1.1.9.1.4 mplsXCIsPersistent readwrite TruthValue
1.3.6.1.4.1.2011.5.12.1.1.9.1.5 mplsXCOwner readwrite MplsObjectOwner
1.3.6.1.4.1.2011.5.12.1.1.9.1.6 mplsXCRowStatus readwrite RowStatus
1.3.6.1.4.1.2011.5.12.1.1.9.1.7 mplsXCStorageType readwrite StorageType
1.3.6.1.4.1.2011.5.12.1.1.9.1.8 mplsXCAdminStatus readwrite up(1), down(2), testing(3)
1.3.6.1.4.1.2011.5.12.1.1.9.1.9 mplsXCOperStatus readonly up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7)

Comments