CISCO-HSRP-MIB

  • Organization Cisco Systems, Inc.
  • Last update 2005-12-20

The MIB module provides a means to monitor and configure the Cisco IOS proprietary Hot Standby Router Protocol (HSRP). Cisco HSRP protocol is defined in RFC2281. Terminology: HSRP is a protocol used amoung a group of routers for the purpose of selecting an 'active router' and a 'standby router'. An 'active router' is the router of choice for routing packets. A 'standby router' is a router that takes over the routing duties when an active router fails, or when preset conditions have been met. An 'HSRP group' or a 'standby group' is a set of routers which communicate using HSRP. An HSRP group has a group MAC address and a group Virtual IP address. These are the designated addresses. The active router assumes (i.e. inherits) these group addresses. 'Hello' messages are sent to indicate that a router is running and is capable of becoming the active or standby router. 'Hellotime' is the interval between successive HSRP Hello messages from a given router. 'Holdtime' is the interval between the receipt of a Hello message and the presumption that the sending router has failed.

MIB content

59 objects
Advertisement

Notifications

2 objects
  • 1.3.6.1.4.1.9.9.106.2.0.1 cHsrpStateChange (current)
  • 1.3.6.1.4.1.9.9.106.2.0.1 cHsrpStateChange (current)

Conformance groups

7 objects
  • 1.3.6.1.4.1.9.9.106.3.2.1 cHsrpConfigGroup (1 members)
  • 1.3.6.1.4.1.9.9.106.3.2.2 cHsrpGrpGroup (16 members)
  • 1.3.6.1.4.1.9.9.106.3.2.3 cHsrpNotificationsGroup (0 members)
  • 1.3.6.1.4.1.9.9.106.3.2.4 cHsrpGrpGroupSup (1 members)
  • 1.3.6.1.4.1.9.9.106.3.2.1 cHsrpConfigGroup (1 members)
  • 1.3.6.1.4.1.9.9.106.3.2.2 cHsrpGrpGroup (16 members)
  • 1.3.6.1.4.1.9.9.106.3.2.3 cHsrpNotificationsGroup (0 members)